Autelis Binding - juri8/openhab GitHub Wiki
Autelis manufactures a network enabled pool interface for many popular pool systems. See the Autelis webiste and the Autelis Command Protocol for more information.
The binding is fairly complete and supports the following functionality.
- Read circuit, auxiliary, temperature, pump, chemistry and system values
- Control circuit, auxiliary lighting scenes, and temperature set points
Copy the binding jar (org.openhab.autelis*.jar) to the addons directory
add the following to your openhab.cfg and comment out the relevant options
############################### Autelis Pool Control Binding #########################
#
# Host (name or ip) to connect to
# optional port (default 80)
# optional username and password (no default)
# optional refresh rate in millis (default 5000)
#
#autelis:refresh=5000
#autelis:host=poolcontrol
#autelis:port=80
#autelis:username=admin
#autelis:password=admin
format is
{autelis:"parentNode.childElement"}
or
{autelis:"lightscmd"}
An example to get the system version would be:
{autelis="system.version"}
- only 'equipment.', 'temp.' and 'lightscmd' items can be updated from openhab, everything else is read only.
- For lighting commands the following strings can be sent to a item configured with "{autels:"lightscmd"}" (through a mapped push button for example)
- 'alloff, allon, csync, cset, cswim, party, romance, caribbean, american, sunset, royalty, blue, green, red, white, magenta, hold, recall`
The following are a listing of possible values for the configuration string using a sample xml output from a Autelis controller:
<system>
<runstate>50</runstate>
<model>13</model>
<haddr>20</haddr>
<opmode>0</opmode>
<freeze>0</freeze>
<sensor1>0</sensor1>
<sensor2>0</sensor2>
<sensor3>0</sensor3>
<sensor4>0</sensor4>
<sensor5>0</sensor5>
<version>1.4.4</version>
<time>1425269492</time>
</system>
<equipment>
<circuit1>0</circuit1>
<circuit2>0</circuit2>
<circuit3>0</circuit3>
<circuit4>0</circuit4>
<circuit5>0</circuit5>
<circuit6>0</circuit6>
<circuit7>0</circuit7>
<circuit8>0</circuit8>
<circuit9>0</circuit9>
<circuit10></circuit10>
<circuit11></circuit11>
<circuit12></circuit12>
<circuit13></circuit13>
<circuit14></circuit14>
<circuit15></circuit15>
<circuit16></circuit16>
<circuit17></circuit17>
<circuit18></circuit18>
<circuit19></circuit19>
<circuit20>0</circuit20>
<feature1>0</feature1>
<feature2>0</feature2>
<feature3>0</feature3>
<feature4>0</feature4>
<feature5>0</feature5>
<feature6>0</feature6>
<feature7>0</feature7>
<feature8>0</feature8>
<feature9></feature9>
<feature10></feature10>
</equipment>
<temp>
<poolht>1</poolht>
<spaht>1</spaht>
<htstatus>0</htstatus>
<poolsp>71</poolsp>
<spasp>101</spasp>
<pooltemp>60</pooltemp>
<spatemp>60</spatemp>
<airtemp>55</airtemp>
<tempunits>F</tempunits>
<htpump>0</htpump>
</temp>
<pumps>
<pump1>0,0,0</pump1>
<pump2></pump2>
<pump3></pump3>
<pump4></pump4>
<pump5></pump5>
<pump6></pump6>
<pump7></pump7>
<pump8></pump8>
</pumps>
<chlor>
<chloren>1</chloren>
<poolsp>50</poolsp>
<spasp>0</spasp>
<salt>58</salt>
<super>0</super>
<chlorerr>0</chlorerr>
<chlorname>Intellichlor--40</chlorname>
</chlor>String PoolVersion "Version [%s]" {autelis="system.version"}
Number PoolSetPoint "Pool SetPoint [%d]" {autelis="temp.poolsp"}
Number PoolTemp "Pool Temp [%d]" {autelis="temp.pooltemp"}
Number PoolSpaTemp "Spa Temp [%d]" {autelis="temp.spatemp"}
Number PoolAirTemp "Air Temp [%d]" {autelis="temp.airtemp"}
Number PoolSpaSetPoint "Spa SetPoint [%d]" {autelis="temp.spasp"}
Number PoolChemSalt "Salt Levels [%d]" {autelis="chlor.salt"}
Switch PoolSpaMode "Spa Mode [%s]" {autelis="equipment.circuit1"}
Switch PoolMode "Pool Mode [%s]" {autelis="equipment.circuit6"}
Switch PoolWaterfall "Waterfall [%s]" {autelis="equipment.circuit2"}
Switch PoolSpaLight "Spa Light [%s]" {autelis="equipment.circuit3"}
Switch PoolLight "Pool Light [%s]" {autelis="equipment.circuit4"}
String PoolLightCmd {autelis="lightscmd"}