Lab 01 Environment Setup - jude-lindale/Wiki GitHub Wiki
Lab 01 Environment Setup
In this lab, the task was to set up a small enterprise network using the VMWare Workstation environment. The goals of this lab were to:
- Become familiar with the lab environment
- Configure a firewall that separates my own local area network from other students in the call
- Configure a Windows 10 Workstation to communicate with the internet.
- Firewall Configuration
- Windows 10 VM Configuration
- FW01 GUI Configuration
- Lab Commands
Working Notes
This week we set up the environment that we will be doing our labs in. This environment is a server that is modeled after a Basic Routed Network with WAN and LAN. In this model, the wks01 using the IP address 10.0.5.100 connects to its host studentx on 10.0.5.0/24, which connects wks01 to fw01 using the upstream gateway address of 10.0.5.2. The firewall uses IP address 10.0.17.109 that was assigned by the instructor to connect to the SYS255-WAN host using the IP address 10.0.17.0 which connects to another firewall using another default gateway of 10.0.17.2 which uses the IP address 192.168.4.52 to connect to its host CYBER on 192.168.4.0/24 to finally be connected to the cloud. In setting up this environment I configured the firewall and windows 10 VM's to connect and communicate with one another so that the windows 10 VM could connect to the internet.