20210412 ADDS 1010 - jsheradin/kb_adventures GitHub Wiki

This is an NMB board with a unique layout. It features dye sublimated PBT caps and linear white space invaders. I messed around with the controller quite a bit and had no luck getting it to speak anything meaningful. This meant a controller swap was in order. Being a 2KRO PCB, the route of choice was a replacement PCB with Teensy 2.0 driving it.

I wasn't super confident in my measurements for the PCB so I cheated a bit and way oversized the pin holes for the switches. It made soldering it together a bit wasteful but prevented any misalignment issues. I did not double check the footprint I used for the Teensy and unfortunately there was a swapped pin. A quick bodge fixed the PCB though.