DDI Software Requirements - jrsteensen/OpenHornet GitHub Wiki

  • This sketch shall meet all General Software Requirements
  • This sketch shall run on the custom Arduino Nano based DDI Shield and command the custom DDI Button Board.
  • This sketch shall have the name 1A3A (Left DDI/RS485 Address: 2) or 1A6A (Right DDI/RS485 Address: 5)
  • This sketch shall handle the following hardware components:
    • 20x tactile buttons (output).
    • 2x potentiometers (output).
    • 1x 3 pos rotary switch (output).