• UI

• HDMI not working on RBPi4b

• 4e:22:7a:50:35:0f This appears to be virtual

enospc@homeassistant:~ $ sudo ip addr
1: lo:  mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host noprefixroute 
       valid_lft forever preferred_lft forever
2: eth0:  mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether dc:a6:32:c4:2d:b8 brd ff:ff:ff:ff:ff:ff
    inet 192.168.0.41/24 brd 192.168.0.255 scope global dynamic noprefixroute eth0
       valid_lft 86144sec preferred_lft 86144sec
    inet6 fe80::dea6:32ff:fec4:2db8/64 scope link noprefixroute 
       valid_lft forever preferred_lft forever
3: wlan0:  mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether dc:a6:32:c4:2d:b9 brd ff:ff:ff:ff:ff:ff
    inet 192.168.0.61/24 brd 192.168.0.255 scope global dynamic noprefixroute wlan0
       valid_lft 86146sec preferred_lft 86146sec
    inet6 fe80::dea6:32ff:fec4:2db9/64 scope link proto kernel_ll 
       valid_lft forever preferred_lft forever

enospc@homeassistant:~ $ sudo rpi-eeprom-update 
BOOTLOADER: up to date
   CURRENT: Sun 17 May 19:13:18 UTC 2026 (1779045198)
    LATEST: Sun 17 May 19:13:18 UTC 2026 (1779045198)
   RELEASE: default (/usr/lib/firmware/raspberrypi/bootloader-2711/default)
            Use raspi-config to change the release.

  VL805_FW: Using bootloader EEPROM
     VL805: up to date
   CURRENT: 000138c0
    LATEST: 000138c0