• User's Manual
• Rev 1.03
• RAM: 169 pin DIMM; SDRAM 8-512MB, EDO DRAM 8-1GB
• 2x ATA/33 / ATA-2
• AGP Graphics slot
• 4x 32 bit PCI
• 2x 16 bit ISA
• Adaptec 7880 Wide/Fast SCSI wide and narrow
• Hardware Monitor has register in range 0x290-0x297
• IrDA (UART2)
• SMB header (see below)
• Location: Freya

This is shown in manual as label on layout diagram, but not documented further. Possibly same as Vogons forum

Some of contents are a little questionable.

# dmidecode 3.4
Getting SMBIOS data from sysfs.
Legacy DMI 2.0 present.
32 structures occupying 1024 bytes.
Table at 0x000F55EA.

Handle 0x0000, DMI type 0, 18 bytes
BIOS Information
	Vendor: Award Software, Inc.
	Version: #401A0-0106ds                       
	Release Date: 01/09/98
	Address: 0xF0000
	Runtime Size: 64 kB
	ROM Size: 256 kB
	Characteristics:
		ISA is supported
		PCI is supported
		PNP is supported
		APM is supported
		BIOS is upgradeable
		BIOS shadowing is allowed
		ESCD support is available
		Boot from CD is supported
		Selectable boot is supported
		BIOS ROM is socketed
		EDD is supported
		Japanese floppy for NEC 9800 1.2 MB is supported (int 13h)
		5.25"/360 kB floppy services are supported (int 13h)
		5.25"/1.2 MB floppy services are supported (int 13h)
		3.5"/720 kB floppy services are supported (int 13h)
		3.5"/2.88 MB floppy services are supported (int 13h)
		Print screen service is supported (int 5h)
		8042 keyboard services are supported (int 9h)
		Serial services are supported (int 14h)
		Printer services are supported (int 17h)
		CGA/mono video services are supported (int 10h)

Handle 0x0001, DMI type 1, 8 bytes
System Information
	Manufacturer: System Manufacturer
	Product Name: System Name
	Version: System Version
	Serial Number: SYS-1234567890

Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
	Manufacturer: ASUSTeK Computer INC.
	Product Name: P2L97-DS
	Version: REV 1.xx
	Serial Number: MB-1234567890

Handle 0x0003, DMI type 3, 9 bytes
Chassis Information
	Manufacturer: Chassis Manufacture
	Type: Unknown
	Lock: Not Present
	Version: Chassis Version
	Serial Number: Chassis Serial Number
	Asset Tag: Asset-1234567890

Handle 0x0004, DMI type 4, 26 bytes
Processor Information
	Socket Designation: SLOT 1
	Type: Central Processor
	Family: Pentium Pro
	Manufacturer: Intel Corporation
	ID: 34 06 00 00 FF FB 80 00
	Signature: Type 0, Family 6, Model 3, Stepping 4
	Flags:
		FPU (Floating-point unit on-chip)
		VME (Virtual mode extension)
		DE (Debugging extension)
		PSE (Page size extension)
		TSC (Time stamp counter)
		MSR (Model specific registers)
		PAE (Physical address extension)
		MCE (Machine check exception)
		CX8 (CMPXCHG8 instruction supported)
		APIC (On-chip APIC hardware supported)
		SEP (Fast system call)
		MTRR (Memory type range registers)
		PGE (Page global enable)
		MCA (Machine check architecture)
		CMOV (Conditional move instruction supported)
		MMX (MMX technology supported)
	Version: Intel Pentium II Processor
	Voltage: 2.9 V
	External Clock: 66 MHz
	Max Speed: 366 MHz
	Current Speed: 300 MHz
	Status: Populated, Enabled
	Upgrade: Slot 1

Handle 0x0005, DMI type 5, 31 bytes
Memory Controller Information
	Error Detecting Method: None
	Error Correcting Capabilities:
		None
	Supported Interleave: One-way Interleave
	Current Interleave: One-way Interleave
	Maximum Memory Module Size: 64 MB
	Maximum Total Memory Size: 512 MB
	Supported Speeds:
		70 ns
		60 ns
		50 ns
	Supported Memory Types:
		EDO
		Parity
		DIMM
	Memory Module Voltage: 3.3 V
	Associated Memory Slots: 8
		0x0006
		0x0007
		0x0008
		0x0009
		0x000C
		0x000D
		0x0000
		0x0000

Handle 0x0007, DMI type 6, 12 bytes
Memory Module Information
	Socket Designation: DIMM1-2  
	Bank Connections: 0 1
	Current Speed: 60 ns
	Type: Other DIMM
	Installed Size: 64 MB (Double-bank Connection)
	Enabled Size: 64 MB (Double-bank Connection)
	Error Status: OK

Handle 0x0008, DMI type 6, 12 bytes
Memory Module Information
	Socket Designation: DIMM2-1  
	Bank Connections: 2 3
	Current Speed: 60 ns
	Type: Other DIMM
	Installed Size: 64 MB (Double-bank Connection)
	Enabled Size: 64 MB (Double-bank Connection)
	Error Status: OK

Handle 0x0009, DMI type 6, 12 bytes
Memory Module Information
	Socket Designation: DIMM2-2  
	Bank Connections: 2 3
	Current Speed: 60 ns
	Type: Other DIMM
	Installed Size: 64 MB (Double-bank Connection)
	Enabled Size: 64 MB (Double-bank Connection)
	Error Status: OK

Handle 0x000A, DMI type 6, 12 bytes
Memory Module Information
	Socket Designation: DIMM3-1  
	Bank Connections: 4 5
	Current Speed: 60 ns
	Type: Other DIMM
	Installed Size: 64 MB (Double-bank Connection)
	Enabled Size: 64 MB (Double-bank Connection)
	Error Status: OK

Handle 0x000B, DMI type 6, 12 bytes
Memory Module Information
	Socket Designation: DIMM3-2  
	Bank Connections: 4 5
	Current Speed: 60 ns
	Type: Other DIMM
	Installed Size: 64 MB (Double-bank Connection)
	Enabled Size: 64 MB (Double-bank Connection)
	Error Status: OK

Handle 0x000C, DMI type 6, 12 bytes
Memory Module Information
	Socket Designation: DIMM4-1  
	Bank Connections: 6 7
	Current Speed: 60 ns
	Type: Other DIMM
	Installed Size: 64 MB (Double-bank Connection)
	Enabled Size: 64 MB (Double-bank Connection)
	Error Status: OK

Handle 0x000D, DMI type 6, 12 bytes
Memory Module Information
	Socket Designation: DIMM4-2  
	Bank Connections: 6 7
	Current Speed: 60 ns
	Type: Other DIMM
	Installed Size: 64 MB (Double-bank Connection)
	Enabled Size: 64 MB (Double-bank Connection)
	Error Status: OK

Handle 0x000E, DMI type 7, 15 bytes
Cache Information
	Socket Designation: L1 Cache
	Configuration: Enabled, Not Socketed, Level 1
	Operational Mode: Write Back
	Location: Internal
	Installed Size: 32 kB
	Maximum Size: 32 kB
	Supported SRAM Types: None
	Installed SRAM Type: None

Handle 0x000F, DMI type 7, 15 bytes
Cache Information
	Socket Designation: L2 Cache
	Configuration: Enabled, Not Socketed, Level 2
	Operational Mode: Write Back
	Location: Internal
	Installed Size: 512 kB
	Maximum Size: 512 kB
	Supported SRAM Types:
		Burst
	Installed SRAM Type: Burst

Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: COM1
	Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
	External Reference Designator: COM A
	External Connector Type: DB-9 male
	Port Type: Serial Port 16550A Compatible

Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: COM2
	Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
	External Reference Designator: COM B
	External Connector Type: DB-25 male
	Port Type: Serial Port 16550A Compatible

Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: PRINTER
	Internal Connector Type: 25 Pin Dual Inline (pin 26 cut)
	External Reference Designator: LPT
	External Connector Type: DB-25 female
	Port Type: Parallel Port ECP/EPP

Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: KEY
	Internal Connector Type: None
	External Reference Designator: KEYBOARD
	External Connector Type: Micro DIN
	Port Type: Keyboard Port

Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: PRIMARY IDE
	Internal Connector Type: On Board IDE
	External Reference Designator: IDE-1
	External Connector Type: None
	Port Type: None

Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: SECONDARY IDE
	Internal Connector Type: On Board IDE
	External Reference Designator: IDE-2
	External Connector Type: None
	Port Type: None

Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: FLOPPY
	Internal Connector Type: On Board Floppy
	External Reference Designator: FLOPPY
	External Connector Type: None
	Port Type: None

Handle 0x0017, DMI type 9, 12 bytes
System Slot Information
	Designation: PCI Slot1
	Type: 32-bit PCI
	Current Usage: In Use
	Length: Long
	ID: 12
	Characteristics:
		5.0 V is provided

Handle 0x0018, DMI type 9, 12 bytes
System Slot Information
	Designation: PCI Slot2
	Type: 32-bit PCI
	Current Usage: Available
	Length: Long
	ID: 11
	Characteristics:
		5.0 V is provided

Handle 0x0019, DMI type 9, 12 bytes
System Slot Information
	Designation: PCI Slot3
	Type: 32-bit PCI
	Current Usage: Available
	Length: Long
	ID: 10
	Characteristics:
		5.0 V is provided

Handle 0x001A, DMI type 9, 12 bytes
System Slot Information
	Designation: PCI Slot4
	Type: 32-bit PCI
	Current Usage: In Use
	Length: Long
	ID: 9
	Characteristics:
		5.0 V is provided

Handle 0x001B, DMI type 9, 12 bytes
System Slot Information
	Designation: ISA Slot1
	Type: 16-bit ISA
	Current Usage: Unknown
	Length: Long
	Characteristics:
		5.0 V is provided
		Opening is shared

Handle 0x001C, DMI type 9, 12 bytes
System Slot Information
	Designation: ISA Slot2
	Type: 16-bit ISA
	Current Usage: Unknown
	Length: Long
	Characteristics:
		5.0 V is provided

Handle 0x001D, DMI type 11, 5 bytes
OEM Strings
	String 1: OEM String

Handle 0x001E, DMI type 12, 5 bytes
System Configuration Options
	Option 1: System String

Handle 0x001F, DMI type 13, 22 bytes
BIOS Language Information
	Installable Languages: 1
		ENGLISH
	Currently Installed Language: ENGLISH

Wrong DMI structures count: 32 announced, only 31 decoded.

i2c-0	smbus     	SMBus PIIX4 adapter at e800     	SMBus adapter

# sensors-detect version 3.6.0
# Board: ASUSTeK Computer INC. P2L97-DS
# Kernel: 6.1.0-45-686-pae i686
# Processor: Pentium II (Klamath) (6/3/4)

Running in automatic mode, default answers to all questions
are assumed.

Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): 
Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595...                       No
VIA VT82C686 Integrated Sensors...                          No
VIA VT8231 Integrated Sensors...                            No
AMD K8 thermal sensors...                                   No
AMD Family 10h thermal sensors...                           No
AMD Family 11h thermal sensors...                           No
AMD Family 12h and 14h thermal sensors...                   No
AMD Family 15h thermal sensors...                           No
AMD Family 16h thermal sensors...                           No
AMD Family 17h thermal sensors...                           No
AMD Family 15h power sensors...                             No
AMD Family 16h power sensors...                             No
Hygon Family 18h thermal sensors...                         No
Intel digital thermal sensor...                             No
Intel AMB FB-DIMM thermal sensor...                         No
Intel 5500/5520/X58 thermal sensor...                       No
VIA C7 thermal sensor...                                    No
VIA Nano thermal sensor...                                  No

Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): 
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      No
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      No

Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no): 
Probing for `IPMI BMC KCS' at 0xca0...                      No
Probing for `IPMI BMC SMIC' at 0xca8...                     No

Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (YES/no): 
Probing for `National Semiconductor LM78' at 0x290...       Success!
    (confidence 6, driver `lm78')
Probing for `National Semiconductor LM79' at 0x290...       No
Probing for `Winbond W83781D' at 0x290...                   No
Probing for `Winbond W83782D' at 0x290...                   No

Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): 
Using driver `i2c-piix4' for device 0000:00:04.3: Intel 82371AB PIIX4 ACPI

Next adapter: SMBus PIIX4 adapter at e800 (i2c-0)
Do you want to scan it? (YES/no/selectively): 
Client found at address 0x50
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 No
Probing for `EDID EEPROM'...                                No
Client found at address 0x51
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 No
Client found at address 0x52
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 No
Client found at address 0x53
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 No


Now follows a summary of the probes I have just done.

Driver `lm78':
  * ISA bus, address 0x290
    Chip `National Semiconductor LM78' (confidence: 6)

To load everything that is needed, add this to /etc/modules:
#----cut here----
# Chip drivers
lm78
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones!

Do you want to add these lines automatically to /etc/modules? (yes/NO)

Unloading cpuid... OK