Opening Console - joe-possum/IoT-Developer-Boot-Camp GitHub Wiki

Table of Contents  

Open Console

Simplicity Studio has integrated a console which is very convenient to debug the WSTK. It's quite easy to open the console. You just need to follow the steps below :

  1. Select the WSTK from the list of the "Debug Adapters" window. Right click and select "Launch Console".

common

  1. Then select the "Serial 1" tab, hit enter on the console.

common

Home | BLE | Zigbee | Hardware

All resources of this repository are released under license CC BY-NC-ND 4.0 license

⚠️ **GitHub.com Fallback** ⚠️