SamsungPlatformPkg - jljusten/tianocore GitHub Wiki

The Samsung Origen (http://www.origenboard.org/) is one of the low-cost ARM development boards. The platform is powered by a dual Cortex A9 and supports a large range of devices on boards (2x SD card, LCD & HDMI connectors, USB 2.0, etc).

Status

Tested on the revisions:

  • EDK2: 13012 (14/02/2012)
  • SamsungPlatformPkg: commit: ed456b2d64f3 (22/11/2011)

Build EDK2 for Samsung Origen

1. The EDK2 Samsung repository is currently located in a third-party repository. To get the sources: 

svn co https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2 edk2 --username guest
cd $(WORKROOT)/edk2
svn co https://edk2-fatdriver2.svn.sourceforge.net/svnroot/edk2-fatdriver2/trunk/FatPkg FatPkg --username guest
git clone git://github.com/girishks/Origen-EDK-II-Package.git
mv Origen-EDK-II-Package/SamsungPlatformPkg .

2. Apply the latest patches: 

patch -p1 < 0001-SamsungPlatformPkg-ExynosPkg-Do-not-initialize-the-T.patch 
patch -p1 < 0002-SamsungPlatformPkg-TimerDxe-Do-not-overwrite-Timers-.patch
patch -p1 < 0003-SamsungPlatformPkg-ExynosPkg-Fixed-UART-Rx-Ready-Fla.patch
patch -p1 < 0004-SamsungPlatformPkg-OrigenBoardPkg-Update-Linux-infor.patch
patch -p1 < 0005-SamsungPlatformPkg-OrigenBoardPkg-Removed-deprecated.patch
patch -p1 < 0006-SamsungPlatformPkg-SmdkBoardPkg-Removed-memory-initi.patch
patch -p1 < 0007-SamsungPlatformPkg-SmdkBoardLib-Fixed-GCC-build-issu.patch

3. Add support for one of the supported toolchains. See ArmPkg-Toolchain

4. Build EDK2: 

. edksetup.sh
make -C BaseTools
build -a ARM -p SamsungPlatformPkg/OrigenBoardPkg/OrigenBoardPkg-Exynos.dsc -t ARMLINUXGCC -b DEBUG

5. Get the Linaro Linux distribution:

6. Install Linaro image Creator either from the tarball or the Ubuntu package.
  • Getting from Linaro website:
wget http://launchpad.net/linaro-image-tools/trunk/0.4.8/+download/linaro-image-tools-0.4.8.tar.gz
tar xzf linaro-image-tools-0.4.8.tar.gz
cd $(WORKROOT)/linaro-image-tools-0.4.8/
sudo apt-get install parted dosfstools uboot-mkimage python-argparse python-dbus python-debian python-parted qemu-arm-static btrfs-tools command-not-found
Add linaro-media-create path to the PATH environment variable
  • Getting from the Ubuntu package:
sudo add-apt-repository ppa:linaro-maintainers/tools
sudo apt-get update
sudo apt-get install linaro-image-tools

7. Create the SD card. Replace the '/dev/sdX' with the device node mapped to your MMC/SC card. 

sudo linaro-media-create --mmc /dev/sdX --dev origen --binary linaro-o-nano-tar-20120123-1.tar.gz --hwpack hwpack_linaro-leb-origen_20120123-1_armel_supported.tar.gz

8. Replace u-boot by the EDK2 firmware you created in step 4: 

sudo dd if=Build/OrigenBoard-Exynos/DEBUG_ARMLINUXGCC/FV/ORIGENBOARD_EFI.fd of=/dev/sdb bs=512 seek=65
See this page https://wiki.linaro.org/Boards/Origen/Setup for more information about the command.

9. Insert the newly created SD card into the Origen SD card slot and power up the platform. 

UEFI firmware built at 19:29:37 on Feb 20 2012
Timer 2,3 Configured
UEFI firmware built at 19:29:38 on Feb 20 2012
add-symbol-file /home/olivier/tianocore/Build/OrigenBoard-Exynos/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll 0x4FD39240
Loading DxeCore at 0x004FD39000 EntryPoint=0x004FD39241
add-symbol-file /home/olivier/tianocore/Build/OrigenBoard-Exynos/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll 0x4FD39004
HOBLIST address in DXE = 0x4FD21590
Memory Allocation 0x00000004 0x4FF9C000 - 0x4FFEBFFF
Memory Allocation 0x00000004 0x4FF94000 - 0x4FF9BFFF
Memory Allocation 0x00000004 0x4FFEC000 - 0x4FFFFFFF
Memory Allocation 0x00000004 0x4FF84000 - 0x4FF93FFF
(...)
add-symbol-file /home/olivier/tianocore/Build/OrigenBoard-Exynos/DEBUG_ARMLINUXGCC/ARM/MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe/DEBUG/EnglishDxe.dll 0x4F8B3240
Loading driver at 0x0004F8B3000 EntryPoint=0x0004F8B3261 EnglishDxe.efi
The default boot selection will start in   8 seconds
[1] SD-MMC Booting
        - VenHw(B615F1F5-5088-43CD-809C-A16E52487D00)/HD(2,MBR,0x0009C1D9,0x2000,0x1A000)/uImage
        - Initrd: VenHw(B615F1F5-5088-43CD-809C-A16E52487D00)/HD(2,MBR,0x0009C1D9,0x2000,0x1A000)/uInitrd
        - Arguments: console=ttySAC2,115200n8  root=UUID=73ce15fe-4c31-47e5-b537-9759497e9615 rootwait ro
        - LoaderType: 1
[2] EBL
[3] Boot Manager
Start:

Home | Getting Started with EDK II | Reporting Issues | Community Information | Community Support | Tasks | BSD

⚠️ **GitHub.com Fallback** ⚠️