CHS:

正常的编译就不多说了，依赖 Rockchip 的 MPP 和 RGA ，以及 libdrm, libx264。

• MPP: https://github.com/JeffyCN/mirrors/tree/mpp-dev
• RGA: https://github.com/jjm2473/librga

示例编译命令（根据自己的环境调整参数）：

./configure --enable-cross-compile --cross-prefix="aarch64-linux-gnu-" --arch="aarch64" --cpu=cortex-a53 --target-os=linux --prefix="/usr" --pkg-config="pkg-config" --enable-shared --enable-static --enable-pthreads --enable-zlib --disable-doc --disable-debug --disable-lzma --disable-vaapi --disable-vdpau --disable-runtime-cpudetect --enable-lto --enable-neon --enable-vfp --enable-gnutls --disable-encoder="svq1" --enable-libopus --enable-hardcoded-tables --enable-libmp3lame --enable-gpl --enable-libx264 --enable-version3 --enable-nonfree --enable-libdrm --enable-librga --enable-rkmpp --enable-libfdk-aac

make -j4

注意configure阶段--enable-gpl --enable-libx264 --enable-version3 --enable-nonfree --enable-libdrm --enable-librga --enable-rkmpp都是必需的。交叉编译相关的问题请勿反馈，自行解决。

如果是 OpenWRT 编译，不用浪费时间研究，直接使用这些代码:

• https://github.com/jjm2473/packages/tree/istoreos-22.03/multimedia/ffmpeg-mpp
• https://github.com/jjm2473/packages/tree/istoreos-22.03/multimedia/rkmpp
• https://github.com/jjm2473/packages/tree/istoreos-22.03/multimedia/rkrga

如果打算使用 Docker 部署 Jellyfin，那也不需要自己编译，直接使用我编译好的镜像：

• https://hub.docker.com/r/jjm2473/jellyfin-mpp

如果要自己编译，但是不熟悉交叉编译环境的搭建，可以使用 Docker 虚拟 arm64 环境编译，但是速度非常慢（arm64v8/debian 镜像，参考 Docker 运行跨平台镜像 ）：

./configure --prefix=/usr --pkg-config=pkg-config --enable-shared --enable-pthreads --enable-zlib --disable-doc --disable-debug --disable-lzma --disable-vaapi --disable-vdpau --enable-lto --enable-neon --enable-vfp --enable-gnutls --enable-libopus --enable-hardcoded-tables --enable-libmp3lame --enable-gpl --enable-libx264 --enable-version3 --enable-nonfree --enable-libdrm --enable-librga --enable-rkmpp --enable-libfdk-aac

make -j4

---

ENG:

This project depends on Rockchip's MPP and RGA, and libdrm, libx264.

• MPP: https://github.com/JeffyCN/mirrors/tree/mpp-dev
• RGA: https://github.com/jjm2473/librga

Example compilation command (adjust parameters according to your own environment):

./configure --enable-cross-compile --cross-prefix="aarch64-linux-gnu-" --arch="aarch64" --cpu=cortex-a53 --target-os=linux --prefix="/usr" --pkg-config="pkg-config" --enable-shared --enable-static --enable-pthreads --enable-zlib --disable-doc --disable-debug --disable-lzma --disable-vaapi --disable-vdpau --disable-runtime-cpudetect --enable-lto --enable-neon --enable-vfp --enable-gnutls --disable-encoder="svq1" --enable-libopus --enable-hardcoded-tables --enable-libmp3lame --enable-gpl --enable-libx264 --enable-version3 --enable-nonfree --enable-libdrm --enable-librga --enable-rkmpp --enable-libfdk-aac

make -j4

Note that the configure phase --enable-gpl --enable-libx264 --enable-version3 --enable-nonfree --enable-libdrm --enable-librga --enable-rkmpp is required. Please do not report problems related to cross-compilation, and solve them by yourself.

If you are working with OpenWRT, don't waste your time on tuning compilation parameters, just use these Makefiles:

• https://github.com/jjm2473/packages/tree/main/multimedia/ffmpeg-mpp
• https://github.com/jjm2473/packages/tree/main/multimedia/rkmpp
• https://github.com/jjm2473/packages/tree/main/multimedia/rkrga

If you plan to use Docker to deploy Jellyfin, you don’t need to compile it yourself, just use the image I compiled:

• https://hub.docker.com/r/jjm2473/jellyfin-mpp