Fan_Module_DFR0332 - jimaobian/DFRobotWiki GitHub Wiki

right

Introduction

This is a Fan module. You could make some interesting project with this module.

Specification

  • Working Voltage：3~6V
  • Working Temperature：-20~85℃
  • Speed (no load)：15000 rpm
  • Speed (6V)：8000 rpm
  • Current (6V)：40mA
  • Stall current (6V)：360mA
  • Torque (6V):0.111kg/cm
  • Size: 36*27*13 mm
  • Weight: 22g

Connection Diagram

center

Sample Code


//Arduino Sample Code for Fan Module
//www.DFRobot.com
//Version 1.0

#define Fan 3    //define driver pins

void setup()
{
  pinMode(Fan,OUTPUT);
  Serial.begin(9600);    //Baudrate: 9600
}
void loop()
{
  int value;
  for(value = 0 ; value <= 255; value+=5)
  {
    analogWrite(Fan, value);   //PWM
    Serial.println(value);
    delay(30);
  }
}

image:nextredirectltr.pngGo shopping fan module (dfr0332) category: Product Manual category: DFR Series category: Hardware-Mechanical