386AMP_audio_amplifier_Module_(SKU__DFR0064) - jimaobian/DFRobotWiki GitHub Wiki

Introduction

386AMP audio amplifier Module (SKU: DFR0064) this dfrobot 386amp audio amplifier module uses the national semiconductor lm386 audio power amplifier chip. it has 20 voltage gain.

With a 6V power supply, it has a static power consumption of only 24mW, the module is suitable for battery-powered applications. The 386AMP audio amplifier can be connected to MIC or acoustic sensor module, after the sound is amplified it is passed to the speaker. It is ideal for robot human-machine voice interaction and sound amplification.

Specification

  • Power supply:4-12V
  • Output power:VS = 6V, RL = 8W,P=325mW，Peak output 500mW
  • Voltage Gain:VS = 6V, f = 1 kHz，Av=26dB
  • Band width:300KHz
  • Size:45x30mm
  • Speaker 8Ω, 0.5W

Amplifier diagram

center Example

In this example, we attached the module to Arduino to power it up, and used some external audio to provide some audio sample, but we actually tested it as well with some noise from a wire we had around. center image:nextredirectltr.pngGo shopping 386amp audio amplifier module (sku: dfr0064)

category: Product Manual category: DFR Series category: Modules