0.3M_pixel_serial_JPEG_camera_module_（SKU：SEN0099） - jimaobian/DFRobotWiki GitHub Wiki

Introduction

The ZM 0.3 Megapixel serial JPEG still camera module has a compact size, low power comsuption, and stable operation. 5.0V DC Supply. UART: Up to 115200bps for transferring JPEG images. The camera uses the advanced OmniVision OV7725 VGA color sensor JPEG CODEC for different resolutions. The camera also features down sampling, clamping and windowing circuits for VGA, QVGA, and no need for external DRAM. The use of the OmniVision CMOS VGA color sensor makes this a low powered comsuption unit.

NOTE: The interface of this module is using RS232 protocol.

Applications

Embedded systems for imaging acquisition and control Security and Control systems, Remote or public monitoring. Retrieved/object detection and recognition. Robot/Industrial control, vehicle and medical systems.

Specification

5V power supply Current consumption: 80-100mA Communication interface/protocol: RS232 VGA/QVGA/160x120 resolution Support capture JPEG from serial port Default baud rate of serial port is 115200 Size:1.51x1.51x1.26"(38.35x38.35x32mm)

Wiring description (For included cable)

Red wire to +5v Black wire to GND Green wire to RS232 RX line Yellow wire to RS232 TX line

Connection Diagram

Documents

0.3M pixel datasheet test software pro test software lite software(pro) operation guide sample image

shopping 0.3m pixel serial jpeg camera module (SEN0099)] category: Product Manual category: DFR Series category: Hardware-Mechanical