Building pandoc on a Raspberry Pi - jgm/pandoc GitHub Wiki

For Raspberry Pi 4 binaries, see also ickc/pandoc-arm.

Raspberry Pi 1 Model B

The following guide is written for Raspberry Pi 1 Model B. YMMV on other models including the newer one.

The pandoc supplied by Raspbian is rather old (1.9.4.2) The last version you can build is 1.11.1 but this is still an improvement. Here is how to do it:

• You need a Raspberry Pi 1 Model B with 512 MB Ram
• You need an 8 GB (or larger) SD Card
• Use raspi-config to set the Memory split to 16 (You can change back to 64 later)
• Set swap to 500 MB (/etc/dphys-swapfile)
• sudo apt-get update && apt-get upgrade
• Boot into console mode (no X)
• If you have any services running (Samba, Hostapd, Apache, ... ) stop them.
• sudo apt-get haskell-platform
• cabal update
• You may want to edit .cabal/config now and set user-install to False, remove the -- to uncomment. Otherwise the newly build packages are only available for the user who build them.
• cabal install pandoc-1.11.1 this will take hours, be warned.
• You may now want to install texlive, the full version will take up 3.5 GB but the small version should do for pandoc.