• scanap [seconds] - Start scanning for all WiFi networks in range (optional duration)
• list -a - Show complete list of found WiFi networks with technical details (signal strength, security type, channels)
• scansta - Find devices connected to WiFi networks around you
• list -s - Show all discovered connected devices
• stopscan - Stop any active scanning operation
• select -a <number[,number,...]> - Target one or more networks from the scan list (use the number(s) shown in list -a)
• select -s <number> - Target a specific station from the scan list
• select -airtag <number> - Select an AirTag from the scan list

• attack -d - Start deauthentication (temporarily disconnects devices from selected network)
• attack -e - Start EAPOL logoff attack
• attack -s - Start SAE flood attack (ESP32-C5/C6 only)
• stopdeauth - Stop deauth attacks

• beaconspam -r - Create multiple random fake networks
• beaconspam -rr - Create Never Gonna Give You Up themed networks
• beaconspam -l - Clone all visible networks in the area
• beaconspam <name> - Create a network with your chosen name
• stopspam - Stop creating fake networks
• beaconadd <SSID> - Add an SSID to the beacon spam list
• beaconremove <SSID> - Remove an SSID from the beacon spam list
• beaconclear - Clear the beacon spam list
• beaconshow - Show the current beacon spam list
• beaconspamlist - Start beacon spamming using the beacon spam list

• Start Default Portal:
  startportal default <AP_SSID> [PSK]
  Example:
  startportal default FreeWiFi
  (PSK is optional for open APs)

• Start Custom Portal (Offline HTML):
  startportal <file-name.html> <AP_SSID> [PSK]
  Example:
  startportal myportal.html FreeWiFi

• List Available Portals:
  listportals
  (Shows all available HTML portals on the SD card)

• Stop Portal:
  stopportal

• capture -probe - Save devices searching for WiFi
• capture -beacon - Save network broadcast information
• capture -deauth - Record deauthentication packets
• capture -raw - Save all wireless traffic
• capture -wps - Capture WPS setup packets
• capture -pwn - Record Pwnagotchi activity
• capture -eapol - Record EAPOL/handshake packets
• capture -stop - Stop recording and save data

• connect <SSID> [Password] - Connect to a WiFi network and save credentials
• dialconnect - Find and interact with smart TVs on network
• powerprinter <ip> <text> <size> <position> - Send text to network printers
  Positions: CM (center), TL (top-left), TR (top-right), BR (bottom-right), BL (bottom-left)

Not available on ESP32-S2:

• blescan -f - Find Flipper Zero devices
• blescan -ds - Detect Bluetooth spam
• blescan -a - Scan for AirTags
• blescan -r - View all Bluetooth traffic
• blescan -s - Stop Bluetooth scanning
• blewardriving - Start BLE wardriving with GPS logging
• blewardriving -s - Stop BLE wardriving
• blespam -apple|-ms|-samsung|-google|-random|-s - BLE spam attacks

• startwd - Begin recording networks with GPS location
• startwd -s - Stop GPS recording
• gpsinfo - Show live GPS info

• help - Show complete command list
• stop - Stop all running operations
• reboot - Restart device
• setcountry <CC> - Set the Wi-Fi country code (ESP32-C5 only)
• timezone <TZ_STRING> - Set the display timezone for the clock view
• apcred <ssid> <password> - Change GhostNet AP credentials
• apcred -r - Reset AP credentials to default
• apenable <on|off> - Enable or disable the Access Point across reboots
• chipinfo - Show chip and memory info
• rgbmode <rainbow|police|strobe|off|color> - Control LED effects
• setrgbpins <red> <green> <blue> - Change RGB LED pins
• sd_config - Show current SD GPIO pin configuration
• sd_pins_mmc <clk> <cmd> <d0> <d1> <d2> <d3> - Set SDMMC pins
• sd_pins_spi <cs> <clk> <miso> <mosi> - Set SPI pins
• sd_save_config - Save SD pin config to SD card

• scanports local [-C/-A/start_port-end_port] - Scan ports on local subnet
• scanports [IP] [-C/-A/start_port-end_port] - Scan ports on a specific IP
• congestion - Display Wi-Fi channel congestion chart
• listenprobes [channel] [stop] - Listen for and log probe requests

Remember to check your hardware compatibility before using commands