homework 09 - james-bern/CS345 GitHub Wiki
Spec
-
A
- Clean your station; put anything you don't want in the cardboard box by the sink.
- Finish your desk pet.
- Name your desk pet, and put its name somewhere near it.
- 3D-print and assemble a copy of the plastic green, yellow, pink, and blue lazy suzan using layout and conversation.
- Do NOT measure the original.
- Use any color(s) you like.
- Revolves in Conversation are your friend :)
- NOTE: To revolve in conversation, the sketch must be in the right half plane.
- NOTE: Conversation can only revolve a full 360 deg; you will need to add an extrude cut to get the cuts.
- Design a metal fidget spinner and email me the DXF.
- Assume we will use 1/8" aluminum.
- Include 1x of the 24x15x5 bearings.
- 23.87mm diameter hole works well for reaming.
- Include at least 4x M3 tapped holes.
- 2.5mm diameter hole works well for tapping.
- Attach some nice 3D-printed plastic piece(s) to your fidget spinner using these tapped holes.
-
A+
- Make your fidget spinner amazing.