HW03 - james-bern/CS345 GitHub Wiki
NOTE
- You may complete this homework in SolidWorks (on the lab computers) or OnShape (on your laptop)
TODO
In the real-world...
- A-
- 30x30x30mm sanded/countersunk/tapped metal and plastic box (ask for help!)
Printed screenshots of SolidWorks/OnShape...
-
A-
- assembly of 30x30x10mm box from last week
- NOTE: You must include whatever screws and nuts are used in your real-world box (you can download these off McMaster)
- part of this very sus servo horn
- NOTE: Don't worry about making it perfect. You only need to nail the major geometric features (get the overall dimensions right; get the mounting holes in the right place.) You're welcome to go further if you like.
- assembly of 30x30x10mm box from last week
-
A
- part of the servo from last week
- NOTE: Again don't worry about making it perfect.
- assembly of "servo bolted to a 2mm thick plate using "nut holder" plate" (mine was pink) from last week
- NOTE: Also add the servo horn on top
- part of the servo from last week
-
A+
- assembly of a little car made with four of the above servos and horns.