1x cut out large emoji taped to the top of your cardboard box
1x 3D-printed pyramid from last homework NOTE: should be SMALL (do NOT print a massive pyramid)
1x 3D-printed 20mm diameter 2mm thick Pac-Man from last homework (drag and drop DXF into conversation and Scale)
2x 3D-printed names (one for one team member) to go on your shelf and then on the wall after the class
your name is a single piece of plastic
you used the fillet tool at least once
(also maybe don't make it like...huge)
4x 3D-printed jig pieces
1x to slip over the circular post
1x to slip inside the circular hole
1x to slip over the cross shaped post
NOTE: the cross is centered in the rectangle
NOTE: the outside of your piece should be flush with the top of the cross and sides of the rectangular post
1x to slip inside the puzzle cutout
NOTE: it should be flush with the neighboring top surface
A
1x 3D-printed replica of the jig itself in NOT-green
1x Cantor Dust castle matching mine
A+
1x visually-pleasing fractal art object of your own creation ✨🙂
📚 NOTE
Calipers
You can use a caliper 3 different ways (outside, inside, depth.)
If you don't know/forget, then ask! 🙂👍
Conversation
Common keyboard shortcuts
draw a line or circle or box
NOTE: holding Shift while drawing a line will snap its angle to 15 degree increments
snap your mouse-click to...
zero (the origin); NOTE: pressing 'z' also "does the click for you"
endpoint (of a line/arc)
middle (of a line/arc)
quad of a line/arc
perpendicular to a line
select or deselect...
all
quality (color) -> 1-8
you can do these things with a selection...
Backspace to delete
move (translate)
Scale
rotate
linear cOpy
Rotational copy
mirror in X or Y
fillet two entities
Measure distance between two points
. hides/shows the dots
'j'oin two lines (removes the dot)
set quality (color) -> 1-8 by clicking
two-click intersect
✨🦄 HINT
Calipers
Use the Measure tool to check your work. (How far is it from this corner to this corner, etc.)
Bambu Studio
You can scale and rotate parts inside of Bambu Studio. This can be a handy trick, though is a little sus (why was your drawing the wrong size to begin with? 🤔)