To enable the FPV logo as the splash image on your ICC, for the mkI Fg Falcon follow these steps. This is free and your car doesn't require any updates or software installed on it, as the owner of the vehicle you already have it installed on your ICC, it just requires enabling in the module configuration. I believe this only will work for colour screens on a mkI Falcon. Monochrome + Colour FDIM's have FPV Logo option.

• mkI Fg Falcon with colour tft screen OR monochrome screen. Works with both!
• OBD Adapter with MS-Can support
• Laptop

• Forscan with Extended License

**It is always a good idea to take a backup of your vehicles data before modifying any configurations. This can be done in Forscan via the Module Configuration section. **

• Select the Module to be Backed Up, ie Front Display Interface Module(AS BUILT)
• Flick over to ms-can on your switch when prompted.
• Select Save & Save the .abt file
• Select the Stop Icon to exit the configuration

^{The FPV Splash logo can be activated in the Front Display Interface Module Configuration.}

---

• 

• 

• 

---

---

If in need of help troubleshooting this, try the forscan.org forums, fordforums.com.au or email me at service [at] canbus.com.au, no charges will apply.

---

• Forscan
Forscan is a Ford specific software compatible with various scantools.
• Forscan Tutorial
• How to use output control
• Modify Module As-Built Data
• How to access MS CAN bus with modified ELM327
• How to run FORScan on Linux
• Helpful Links

---

^{* This is a note to explain that the 75rwkw power added figure is an attempt at humour, and not serious. The correct figure is 15 rwkw. **}

^{**Also joking.}