Update SNMP configuration Object.

Invoke-ADCUpdateSnmptrap [-Trapclass] <String> [-Trapdestination] <String> [[-Version] <String>]
 [[-Td] <Double>] [[-Destport] <Int32>] [[-Communityname] <String>] [[-Srcip] <String>] [[-Severity] <String>]
 [[-Allpartitions] <String>] [-WhatIf] [-Confirm] [<CommonParameters>]

Configuration for snmp trap resource.

Invoke-ADCUpdateSnmptrap -trapclass <string> -trapdestination <string>

An example how to update snmptrap configuration Object(s).

Type of trap messages that the Citrix ADC sends to the trap listener: Generic or the enterprise-specific messages defined in the MIB file. Possible values = generic, specific

Type: String
Parameter Sets: (All)
Aliases:

Required: True
Position: 2
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

IPv4 or the IPv6 address of the trap listener to which the Citrix ADC is to send SNMP trap messages.

Type: String
Parameter Sets: (All)
Aliases:

Required: True
Position: 3
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

SNMP version, which determines the format of trap messages sent to the trap listener. This setting must match the setting on the trap listener. Otherwise, the listener drops the trap messages. Possible values = V1, V2, V3

Type: String
Parameter Sets: (All)
Aliases:

Required: False
Position: 4
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0.

Type: Double
Parameter Sets: (All)
Aliases:

Required: False
Position: 5
Default value: 0
Accept pipeline input: False
Accept wildcard characters: False

UDP port at which the trap listener listens for trap messages. This setting must match the setting on the trap listener. Otherwise, the listener drops the trap messages.

Type: Int32
Parameter Sets: (All)
Aliases:

Required: False
Position: 6
Default value: 0
Accept pipeline input: False
Accept wildcard characters: False

Password (string) sent with the trap messages, so that the trap listener can authenticate them. Can include 1 to 31 uppercase or lowercase letters, numbers, and hyphen (-), period (.) pound (#), space ( ), at (@), equals (=), colon (:), and underscore (_) characters. You must specify the same community string on the trap listener device. Otherwise, the trap listener drops the trap messages.

Type: String
Parameter Sets: (All)
Aliases:

Required: False
Position: 7
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

IPv4 or IPv6 address that the Citrix ADC inserts as the source IP address in all SNMP trap messages that it sends to this trap listener. By default this is the appliance's NSIP or NSIP6 address, but you can specify an IPv4 MIP or SNIP/SNIP6 address. In cluster setup, the default value is the individual node's NSIP, but it can be set to CLIP or Striped SNIP address. In non default partition, this parameter must be set to the SNIP/SNIP6 address.

Type: String
Parameter Sets: (All)
Aliases:

Required: False
Position: 8
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

Severity level at or above which the Citrix ADC sends trap messages to this trap listener. The severity levels, in increasing order of severity, are Informational, Warning, Minor, Major, Critical. This parameter can be set for trap listeners of type SPECIFIC only. The default is to send all levels of trap messages. Important: Trap messages are not assigned severity levels unless you specify severity levels when configuring SNMP alarms. Possible values = Critical, Major, Minor, Warning, Informational

Type: String
Parameter Sets: (All)
Aliases:

Required: False
Position: 9
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

Send traps of all partitions to this destination. Possible values = ENABLED, DISABLED

Type: String
Parameter Sets: (All)
Aliases:

Required: False
Position: 10
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: wi

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

Prompts you for confirmation before running the cmdlet.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: cf

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.

File Name : Invoke-ADCUpdateSnmptrap Version : v2111.2521 Author : John Billekens Reference : https://developer-docs.citrix.com/projects/citrix-adc-nitro-api-reference/en/latest/configuration/snmp/snmptrap/ Requires : PowerShell v5.1 and up ADC 13.x and up. ADC 12 and lower may work, not guaranteed.

https://blog.j81.nl