Update SNMP configuration Object.

Invoke-ADCUpdateSnmpmanager [-Ipaddress] <String> [[-Netmask] <String>] [[-Domainresolveretry] <Int32>]
 [-WhatIf] [-Confirm] [<CommonParameters>]

Configuration for manager resource.

Invoke-ADCUpdateSnmpmanager -ipaddress <string>

An example how to update snmpmanager configuration Object(s).

IP address of the SNMP manager. Can be an IPv4 or IPv6 address. You can instead specify an IPv4 network address or IPv6 network prefix if you want the Citrix ADC to respond to SNMP queries from any device on the specified network. Alternatively, instead of an IPv4 address, you can specify a host name that has been assigned to an SNMP manager. If you do so, you must add a DNS name server that resolves the host name of the SNMP manager to its IP address. Note: The Citrix ADC does not support host names for SNMP managers that have IPv6 addresses.

Type: String
Parameter Sets: (All)
Aliases:

Required: True
Position: 2
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

Subnet mask associated with an IPv4 network address. If the IP address specifies the address or host name of a specific host, accept the default value of 255.255.255.255.

Type: String
Parameter Sets: (All)
Aliases:

Required: False
Position: 3
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

Amount of time, in seconds, for which the Citrix ADC waits before sending another DNS query to resolve the host name of the SNMP manager if the last query failed. This parameter is valid for host-name based SNMP managers only. After a query succeeds, the TTL determines the wait time. The minimum and default value is 5.

Type: Int32
Parameter Sets: (All)
Aliases:

Required: False
Position: 4
Default value: 0
Accept pipeline input: False
Accept wildcard characters: False

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: wi

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

Prompts you for confirmation before running the cmdlet.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: cf

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.

File Name : Invoke-ADCUpdateSnmpmanager Version : v2111.2521 Author : John Billekens Reference : https://developer-docs.citrix.com/projects/citrix-adc-nitro-api-reference/en/latest/configuration/snmp/snmpmanager/ Requires : PowerShell v5.1 and up ADC 13.x and up. ADC 12 and lower may work, not guaranteed.

https://blog.j81.nl