Update NS configuration Object.

Invoke-ADCUpdateNspbr6 [-Name] <String> [[-Action] <String>] [[-Srcipv6] <Boolean>] [[-Srcipop] <String>]
 [[-Srcipv6val] <String>] [[-Srcport] <Boolean>] [[-Srcportop] <String>] [[-Srcportval] <String>]
 [[-Destipv6] <Boolean>] [[-Destipop] <String>] [[-Destipv6val] <String>] [[-Destport] <Boolean>]
 [[-Destportop] <String>] [[-Destportval] <String>] [[-Srcmac] <String>] [[-Srcmacmask] <String>]
 [[-Protocol] <String>] [[-Protocolnumber] <Double>] [[-Vlan] <Double>] [[-Vxlan] <Double>]
 [[-Interface] <String>] [[-Priority] <Double>] [[-Msr] <String>] [[-Monitor] <String>] [[-Nexthop] <Boolean>]
 [[-Nexthopval] <String>] [[-Iptunnel] <String>] [[-Vxlanvlanmap] <String>] [[-Nexthopvlan] <Double>]
 [-PassThru] [-WhatIf] [-Confirm] [<CommonParameters>]

Configuration for PBR6 entry resource.

Invoke-ADCUpdateNspbr6 -name <string>

An example how to update nspbr6 configuration Object(s).

Name for the PBR6. Must begin with an ASCII alphabetic or underscore \(_\) character, and must contain only ASCII alphanumeric, underscore, hash \(#\), period \(.\), space, colon \(:\), at \(@\), equals \(=\), and hyphen \(-\) characters. Cannot be changed after the PBR6 is created.

Type: String
Parameter Sets: (All)
Aliases:

Required: True
Position: 2
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

Action to perform on the outgoing IPv6 packets that match the PBR6. Available settings function as follows:

• ALLOW - The Citrix ADC sends the packet to the designated next-hop router.
• DENY - The Citrix ADC applies the routing table for normal destination-based routing. Possible values = ALLOW, DENY

Type: String
Parameter Sets: (All)
Aliases:

Required: False
Position: 3
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

IP address or range of IP addresses to match against the source IP address of an outgoing IPv6 packet. In the command line interface, separate the range with a hyphen.

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 4
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

Either the equals (=) or does not equal (!=) logical operator. Possible values = =, !=, EQ, NEQ

Type: String
Parameter Sets: (All)
Aliases:

Required: False
Position: 5
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

IP address or range of IP addresses to match against the source IP address of an outgoing IPv6 packet. In the command line interface, separate the range with a hyphen.

Type: String
Parameter Sets: (All)
Aliases:

Required: False
Position: 6
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

Port number or range of port numbers to match against the source port number of an outgoing IPv6 packet. In the command line interface, separate the range with a hyphen. For example: 40-90.

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 7
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

Either the equals (=) or does not equal (!=) logical operator. Possible values = =, !=, EQ, NEQ

Type: String
Parameter Sets: (All)
Aliases:

Required: False
Position: 8
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

Source port (range).

Type: String
Parameter Sets: (All)
Aliases:

Required: False
Position: 9
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

IP address or range of IP addresses to match against the destination IP address of an outgoing IPv6 packet. In the command line interface, separate the range with a hyphen.

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 10
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

Either the equals (=) or does not equal (!=) logical operator. Possible values = =, !=, EQ, NEQ

Type: String
Parameter Sets: (All)
Aliases:

Required: False
Position: 11
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

IP address or range of IP addresses to match against the destination IP address of an outgoing IPv6 packet. In the command line interface, separate the range with a hyphen.

Type: String
Parameter Sets: (All)
Aliases:

Required: False
Position: 12
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

Port number or range of port numbers to match against the destination port number of an outgoing IPv6 packet. In the command line interface, separate the range with a hyphen. For example: 40-90. Note: The destination port can be specified only for TCP and UDP protocols.

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 13
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

Either the equals (=) or does not equal (!=) logical operator. Possible values = =, !=, EQ, NEQ

Type: String
Parameter Sets: (All)
Aliases:

Required: False
Position: 14
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

Destination port (range).

Type: String
Parameter Sets: (All)
Aliases:

Required: False
Position: 15
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

MAC address to match against the source MAC address of an outgoing IPv6 packet.

Type: String
Parameter Sets: (All)
Aliases:

Required: False
Position: 16
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

Used to define range of Source MAC address. It takes string of 0 and 1, 0s are for exact match and 1s for wildcard. For matching first 3 bytes of MAC address, srcMacMask value "000000111111". .

Type: String
Parameter Sets: (All)
Aliases:

Required: False
Position: 17
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

Protocol, identified by protocol name, to match against the protocol of an outgoing IPv6 packet. Possible values = ICMPV6, TCP, UDP, ICMP, IGMP, EGP, IGP, ARGUS, RDP, RSVP, EIGRP, L2TP, ISIS, GGP, IPoverIP, ST, CBT, BBN-RCC-M, NVP-II, PUP, EMCON, XNET, CHAOS, MUX, DCN-MEAS, HMP, PRM, XNS-IDP, TRUNK-1, TRUNK-2, LEAF-1, LEAF-2, IRTP, ISO-TP4, NETBLT, MFE-NSP, MERIT-INP, SEP, 3PC, IDPR, XTP, DDP, IDPR-CMTP, TP++, IL, IPv6, SDRP, IPv6-Route, IPv6-Frag, IDRP, GRE, MHRP, BNA, ESP, AH, I-NLSP, SWIPE, NARP, MOBILE, TLSP, SKIP, IPv6-NoNx, IPv6-Opts, Any-Host-Internal-Protocol, CFTP, Any-Local-Network, SAT-EXPAK, KRYPTOLAN, RVD, IPPC, Any-Distributed-File-System, TFTP, VISA, IPCV, CPNX, CPHB, WSN, PVP, BR-SAT-MO, SUN-ND, WB-MON, WB-EXPAK, ISO-IP, VMTP, SECURE-VM, VINES, TTP, NSFNET-IG, DGP, TCF, OSPFIGP, Sprite-RP, LARP, MTP, AX.25, IPIP, MICP, SCC-SP, ETHERIP, Any-Private-Encryption-Scheme, GMTP, IFMP, PNNI, PIM, ARIS, SCPS, QNX, A/N, IPComp, SNP, Compaq-Pe, IPX-in-IP, VRRP, PGM, Any-0-Hop-Protocol, ENCAP, DDX, IATP, STP, SRP, UTI, SMP, SM, PTP, FIRE, CRTP, CRUDP, SSCOPMCE, IPLT, SPS, PIPE, SCTP, FC, RSVP-E2E-IGNORE, Mobility-Header, UDPLite

Type: String
Parameter Sets: (All)
Aliases:

Required: False
Position: 18
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

Protocol, identified by protocol number, to match against the protocol of an outgoing IPv6 packet.

Type: Double
Parameter Sets: (All)
Aliases:

Required: False
Position: 19
Default value: 0
Accept pipeline input: False
Accept wildcard characters: False

ID of the VLAN. The Citrix ADC compares the PBR6 only to the outgoing packets on the specified VLAN. If you do not specify an interface ID, the appliance compares the PBR6 to the outgoing packets on all VLANs.

Type: Double
Parameter Sets: (All)
Aliases:

Required: False
Position: 20
Default value: 0
Accept pipeline input: False
Accept wildcard characters: False

ID of the VXLAN. The Citrix ADC compares the PBR6 only to the outgoing packets on the specified VXLAN. If you do not specify an interface ID, the appliance compares the PBR6 to the outgoing packets on all VXLANs.

Type: Double
Parameter Sets: (All)
Aliases:

Required: False
Position: 21
Default value: 0
Accept pipeline input: False
Accept wildcard characters: False

ID of an interface. The Citrix ADC compares the PBR6 only to the outgoing packets on the specified interface. If you do not specify a value, the appliance compares the PBR6 to the outgoing packets on all interfaces.

Type: String
Parameter Sets: (All)
Aliases:

Required: False
Position: 22
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

Priority of the PBR6, which determines the order in which it is evaluated relative to the other PBR6s. If you do not specify priorities while creating PBR6s, the PBR6s are evaluated in the order in which they are created.

Type: Double
Parameter Sets: (All)
Aliases:

Required: False
Position: 23
Default value: 0
Accept pipeline input: False
Accept wildcard characters: False

Monitor the route specified by the Next Hop parameter. Possible values = ENABLED, DISABLED

Type: String
Parameter Sets: (All)
Aliases:

Required: False
Position: 24
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

The name of the monitor.(Can be only of type ping or ARP ).

Type: String
Parameter Sets: (All)
Aliases:

Required: False
Position: 25
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

IP address of the next hop router to which to send matching packets if action is set to ALLOW. This next hop should be directly reachable from the appliance.

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 26
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

The Next Hop IPv6 address.

Type: String
Parameter Sets: (All)
Aliases:

Required: False
Position: 27
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

The iptunnel name where packets need to be forwarded upon.

Type: String
Parameter Sets: (All)
Aliases:

Required: False
Position: 28
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

The vlan to vxlan mapping to be applied for incoming packets over this pbr tunnel.

Type: String
Parameter Sets: (All)
Aliases:

Required: False
Position: 29
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

VLAN number to be used for link local nexthop .

Type: Double
Parameter Sets: (All)
Aliases:

Required: False
Position: 30
Default value: 0
Accept pipeline input: False
Accept wildcard characters: False

Return details about the created nspbr6 item.

Type: SwitchParameter
Parameter Sets: (All)
Aliases:

Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: wi

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

Prompts you for confirmation before running the cmdlet.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: cf

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.

File Name : Invoke-ADCUpdateNspbr6 Version : v2111.2521 Author : John Billekens Reference : https://developer-docs.citrix.com/projects/citrix-adc-nitro-api-reference/en/latest/configuration/ns/nspbr6/ Requires : PowerShell v5.1 and up ADC 13.x and up. ADC 12 and lower may work, not guaranteed.

https://blog.j81.nl