Unset Subscriber configuration Object.

Invoke-ADCUnsetSubscribergxinterface [[-vserver] <Boolean>] [[-service] <Boolean>]
 [[-holdonsubscriberabsence] <Boolean>] [[-requesttimeout] <Boolean>] [[-requestretryattempts] <Boolean>]
 [[-idlettl] <Boolean>] [[-revalidationtimeout] <Boolean>] [[-healthcheck] <Boolean>]
 [[-healthcheckttl] <Boolean>] [[-cerrequesttimeout] <Boolean>] [[-negativettl] <Boolean>]
 [[-negativettllimitedsuccess] <Boolean>] [[-purgesdbongxfailure] <Boolean>] [[-servicepathavp] <Boolean>]
 [[-servicepathvendorid] <Boolean>] [-WhatIf] [-Confirm] [<CommonParameters>]

Configuration for Gx interface Parameters resource.

Invoke-ADCUnsetSubscribergxinterface

An example how to unset subscribergxinterface configuration Object(s).

Name of the load balancing, or content switching vserver to which the Gx connections are established. The service type of the virtual server must be DIAMETER/SSL_DIAMETER. Mutually exclusive with the service parameter. Therefore, you cannot set both service and the Virtual Server in the Gx Interface.

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 2
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

Name of DIAMETER/SSL_DIAMETER service corresponding to PCRF to which the Gx connection is established. The service type of the service must be DIAMETER/SSL_DIAMETER. Mutually exclusive with vserver parameter. Therefore, you cannot set both Service and the Virtual Server in the Gx Interface.

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 3
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

Set this setting to yes if Citrix ADC needs to Hold pakcets till subscriber session is fetched from PCRF. Else set to NO. By default set to yes. If this setting is set to NO, then till Citrix ADC fetches subscriber from PCRF, default subscriber profile will be applied to this subscriber if configured. If default subscriber profile is also not configured an undef would be raised to expressions which use Subscriber attributes. . Possible values = YES, NO

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 4
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

q!Time, in seconds, within which the Gx CCR request must complete. If the request does not complete within this time, the request is retransmitted for requestRetryAttempts time. If still reuqest is not complete then default subscriber profile will be applied to this subscriber if configured. If default subscriber profile is also not configured an undef would be raised to expressions which use Subscriber attributes. Zero disables the timeout. !.

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 5
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

If the request does not complete within requestTimeout time, the request is retransmitted for requestRetryAttempts time.

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 6
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

q!Idle Time, in seconds, after which the Gx CCR-U request will be sent after any PCRF activity on a session. Any RAR or CCA message resets the timer. Zero value disables the idle timeout. !.

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 7
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

q!Revalidation Timeout, in seconds, after which the Gx CCR-U request will be sent after any PCRF activity on a session. Any RAR or CCA message resets the timer. Zero value disables the idle timeout. !.

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 8
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

q!Set this setting to yes if Citrix ADC should send DWR packets to PCRF server. When the session is idle, healthcheck timer expires and DWR packets are initiated in order to check that PCRF server is active. By default set to No. !. Possible values = YES, NO

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 9
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

q!Healthcheck timeout, in seconds, after which the DWR will be sent in order to ensure the state of the PCRF server. Any CCR, CCA, RAR or RRA message resets the timer. !.

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 10
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

q!Healthcheck request timeout, in seconds, after which the Citrix ADC considers that no CCA packet received to the initiated CCR. After this time Citrix ADC should send again CCR to PCRF server. !.

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 11
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

q!Negative TTL, in seconds, after which the Gx CCR-I request will be resent for sessions that have not been resolved by PCRF due to server being down or no response or failed response. Instead of polling the PCRF server constantly, negative-TTL makes Citrix ADC stick to un-resolved session. Meanwhile Citrix ADC installs a negative session to avoid going to PCRF. For Negative Sessions, Netcaler inherits the attributes from default subscriber profile if default subscriber is configured. A default subscriber could be configured as 'add subscriber profile *'. Or these attributes can be inherited from Radius as well if Radius is configued. Zero value disables the Negative Sessions. And Citrix ADC does not install Negative sessions even if subscriber session could not be fetched. !.

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 12
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

Set this to YES if Citrix ADC should create negative session for Result-Code DIAMETER_LIMITED_SUCCESS (2002) received in CCA-I. If set to NO, regular session is created. Possible values = YES, NO

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 13
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

Set this setting to YES if needed to purge Subscriber Database in case of Gx failure. By default set to NO. . Possible values = YES, NO

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 14
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

The AVP code in which PCRF sends service path applicable for subscriber.

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 15
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

The vendorid of the AVP in which PCRF sends service path for subscriber.

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 16
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: wi

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

Prompts you for confirmation before running the cmdlet.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: cf

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.

File Name : Invoke-ADCUnsetSubscribergxinterface Version : v2111.2521 Author : John Billekens Reference : https://developer-docs.citrix.com/projects/citrix-adc-nitro-api-reference/en/latest/configuration/subscriber/subscribergxinterface Requires : PowerShell v5.1 and up ADC 13.x and up. ADC 12 and lower may work, not guaranteed.

https://blog.j81.nl