Unset NS configuration Object.

Invoke-ADCUnsetNspbr [[-Name] <String>] [[-srcip] <Boolean>] [[-srcport] <Boolean>] [[-destip] <Boolean>]
 [[-destport] <Boolean>] [[-nexthop] <Boolean>] [[-iptunnel] <Boolean>] [[-vxlanvlanmap] <Boolean>]
 [[-srcmac] <Boolean>] [[-srcmacmask] <Boolean>] [[-protocol] <Boolean>] [[-vlan] <Boolean>]
 [[-vxlan] <Boolean>] [[-Interface] <Boolean>] [[-msr] <Boolean>] [[-monitor] <Boolean>] [-WhatIf] [-Confirm]
 [<CommonParameters>]

Configuration for Policy Based Routing(PBR) entry resource.

Invoke-ADCUnsetNspbr -name <string>

An example how to unset nspbr configuration Object(s).

Name for the PBR. Must begin with an ASCII alphabetic or underscore \(_\) character, and must contain only ASCII alphanumeric, underscore, hash \(#\), period \(.\), space, colon \(:\), at \(@\), equals \(=\), and hyphen \(-\) characters. Cannot be changed after the PBR is created.

Type: String
Parameter Sets: (All)
Aliases:

Required: False
Position: 2
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

IP address or range of IP addresses to match against the source IP address of an outgoing IPv4 packet. In the command line interface, separate the range with a hyphen. For example: 10.102.29.30-10.102.29.189.

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 3
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

Port number or range of port numbers to match against the source port number of an outgoing IPv4 packet. In the command line interface, separate the range with a hyphen. For example: 40-90. Note: The destination port can be specified only for TCP and UDP protocols.

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 4
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

IP address or range of IP addresses to match against the destination IP address of an outgoing IPv4 packet. In the command line interface, separate the range with a hyphen. For example: 10.102.29.30-10.102.29.189.

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 5
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

Port number or range of port numbers to match against the destination port number of an outgoing IPv4 packet. In the command line interface, separate the range with a hyphen. For example: 40-90. Note: The destination port can be specified only for TCP and UDP protocols.

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 6
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

IP address of the next hop router or the name of the link load balancing virtual server to which to send matching packets if action is set to ALLOW. If you specify a link load balancing (LLB) virtual server, which can provide a backup if a next hop link fails, first make sure that the next hops bound to the LLB virtual server are actually next hops that are directly connected to the Citrix ADC. Otherwise, the Citrix ADC throws an error when you attempt to create the PBR. The next hop can be null to represent null routes.

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 7
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

The Tunnel name.

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 8
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

The vlan to vxlan mapping to be applied for incoming packets over this pbr tunnel.

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 9
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

MAC address to match against the source MAC address of an outgoing IPv4 packet.

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 10
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

Used to define range of Source MAC address. It takes string of 0 and 1, 0s are for exact match and 1s for wildcard. For matching first 3 bytes of MAC address, srcMacMask value "000000111111". .

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 11
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

Protocol, identified by protocol name, to match against the protocol of an outgoing IPv4 packet. Possible values = ICMP, IGMP, TCP, EGP, IGP, ARGUS, UDP, RDP, RSVP, EIGRP, L2TP, ISIS, GGP, IPoverIP, ST, CBT, BBN-RCC-M, NVP-II, PUP, EMCON, XNET, CHAOS, MUX, DCN-MEAS, HMP, PRM, XNS-IDP, TRUNK-1, TRUNK-2, LEAF-1, LEAF-2, IRTP, ISO-TP4, NETBLT, MFE-NSP, MERIT-INP, SEP, 3PC, IDPR, XTP, DDP, IDPR-CMTP, TP++, IL, IPv6, SDRP, IPv6-Route, IPv6-Frag, IDRP, GRE, MHRP, BNA, ESP, AH, I-NLSP, SWIPE, NARP, MOBILE, TLSP, SKIP, ICMPV6, IPv6-NoNx, IPv6-Opts, Any-Host-Internal-Protocol, CFTP, Any-Local-Network, SAT-EXPAK, KRYPTOLAN, RVD, IPPC, Any-Distributed-File-System, TFTP, VISA, IPCV, CPNX, CPHB, WSN, PVP, BR-SAT-MO, SUN-ND, WB-MON, WB-EXPAK, ISO-IP, VMTP, SECURE-VM, VINES, TTP, NSFNET-IG, DGP, TCF, OSPFIGP, Sprite-RP, LARP, MTP, AX.25, IPIP, MICP, SCC-SP, ETHERIP, Any-Private-Encryption-Scheme, GMTP, IFMP, PNNI, PIM, ARIS, SCPS, QNX, A/N, IPComp, SNP, Compaq-Pe, IPX-in-IP, VRRP, PGM, Any-0-Hop-Protocol, ENCAP, DDX, IATP, STP, SRP, UTI, SMP, SM, PTP, FIRE, CRTP, CRUDP, SSCOPMCE, IPLT, SPS, PIPE, SCTP, FC, RSVP-E2E-IGNORE, Mobility-Header, UDPLite

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 12
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

ID of the VLAN. The Citrix ADC compares the PBR only to the outgoing packets on the specified VLAN. If you do not specify any interface ID, the appliance compares the PBR to the outgoing packets on all VLANs.

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 13
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

ID of the VXLAN. The Citrix ADC compares the PBR only to the outgoing packets on the specified VXLAN. If you do not specify any interface ID, the appliance compares the PBR to the outgoing packets on all VXLANs.

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 14
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

ID of an interface. The Citrix ADC compares the PBR only to the outgoing packets on the specified interface. If you do not specify any value, the appliance compares the PBR to the outgoing packets on all interfaces.

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 15
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

Monitor the route specified byte Next Hop parameter. This parameter is not applicable if you specify a link load balancing (LLB) virtual server name with the Next Hop parameter. Possible values = ENABLED, DISABLED

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 16
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

The name of the monitor.(Can be only of type ping or ARP ).

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 17
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: wi

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

Prompts you for confirmation before running the cmdlet.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: cf

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.

File Name : Invoke-ADCUnsetNspbr Version : v2111.2521 Author : John Billekens Reference : https://developer-docs.citrix.com/projects/citrix-adc-nitro-api-reference/en/latest/configuration/ns/nspbr Requires : PowerShell v5.1 and up ADC 13.x and up. ADC 12 and lower may work, not guaranteed.

https://blog.j81.nl