Unset Lsn configuration Object.

Invoke-ADCUnsetLsnappsprofile [[-Appsprofilename] <String>] [[-ippooling] <Boolean>] [[-mapping] <Boolean>]
 [[-filtering] <Boolean>] [[-tcpproxy] <Boolean>] [[-td] <Boolean>] [[-l2info] <Boolean>] [-WhatIf] [-Confirm]
 [<CommonParameters>]

Configuration for LSN Application Profile resource.

Invoke-ADCUnsetLsnappsprofile -appsprofilename <string>

An example how to unset lsnappsprofile configuration Object(s).

Name for the LSN application profile. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the LSN application profile is created.

Type: String
Parameter Sets: (All)
Aliases:

Required: False
Position: 2
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

NAT IP address allocation options for sessions associated with the same subscriber. Available options function as follows:

• Paired - The Citrix ADC allocates the same NAT IP address for all sessions associated with the same subscriber. When all the ports of a NAT IP address are used in LSN sessions (for same or multiple subscribers), the Citrix ADC ADC drops any new connection from the subscriber.
• Random - The Citrix ADC allocates random NAT IP addresses, from the pool, for different sessions associated with the same subscriber. This parameter is applicable to dynamic NAT allocation only. Possible values = PAIRED, RANDOM

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 3
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

Type of LSN mapping to apply to subsequent packets originating from the same subscriber IP address and port. Consider an example of an LSN mapping that includes the mapping of the subscriber IP:port (X:x), NAT IP:port (N:n), and external host IP:port (Y:y). Available options function as follows:

• ENDPOINT-INDEPENDENT - Reuse the LSN mapping for subsequent packets sent from the same subscriber IP address and port (X:x) to any external IP address and port.
• ADDRESS-DEPENDENT - Reuse the LSN mapping for subsequent packets sent from the same subscriber IP address and port (X:x) to the same external IP address (Y), regardless of the external port.
• ADDRESS-PORT-DEPENDENT - Reuse the LSN mapping for subsequent packets sent from the same internal IP address and port (X:x) to the same external IP address and port (Y:y) while the mapping is still active. Possible values = ENDPOINT-INDEPENDENT, ADDRESS-DEPENDENT, ADDRESS-PORT-DEPENDENT

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 4
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

Type of filter to apply to packets originating from external hosts. Consider an example of an LSN mapping that includes the mapping of subscriber IP:port (X:x), NAT IP:port (N:n), and external host IP:port (Y:y). Available options function as follows:

• ENDPOINT INDEPENDENT - Filters out only packets not destined to the subscriber IP address and port X:x, regardless of the external host IP address and port source (Z:z). The Citrix ADC forwards any packets destined to X:x. In other words, sending packets from the subscriber to any external IP address is sufficient to allow packets from any external hosts to the subscriber.
• ADDRESS DEPENDENT - Filters out packets not destined to subscriber IP address and port X:x. In addition, the ADC filters out packets from Y:y destined for the subscriber (X:x) if the client has not previously sent packets to Y:anyport (external port independent). In other words, receiving packets from a specific external host requires that the subscriber first send packets to that specific external host's IP address.
• ADDRESS PORT DEPENDENT (the default) - Filters out packets not destined to subscriber IP address and port (X:x). In addition, the Citrix ADC filters out packets from Y:y destined for the subscriber (X:x) if the subscriber has not previously sent packets to Y:y. In other words, receiving packets from a specific external host requires that the subscriber first send packets first to that external IP address and port. Possible values = ENDPOINT-INDEPENDENT, ADDRESS-DEPENDENT, ADDRESS-PORT-DEPENDENT

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 5
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

Enable TCP proxy, which enables the Citrix ADC to optimize the TCP traffic by using Layer 4 features. Possible values = ENABLED, DISABLED

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 6
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

ID of the traffic domain through which the Citrix ADC sends the outbound traffic after performing LSN. If you do not specify an ID, the ADC sends the outbound traffic through the default traffic domain, which has an ID of 0.

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 7
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

Enable l2info by creating natpcbs for LSN, which enables the Citrix ADC to use L2CONN/MBF with LSN. Possible values = ENABLED, DISABLED

Type: Boolean
Parameter Sets: (All)
Aliases:

Required: False
Position: 8
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: wi

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

Prompts you for confirmation before running the cmdlet.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: cf

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.

File Name : Invoke-ADCUnsetLsnappsprofile Version : v2111.2521 Author : John Billekens Reference : https://developer-docs.citrix.com/projects/citrix-adc-nitro-api-reference/en/latest/configuration/lsn/lsnappsprofile Requires : PowerShell v5.1 and up ADC 13.x and up. ADC 12 and lower may work, not guaranteed.

https://blog.j81.nl