Get NS configuration object(s).

Invoke-ADCGetNsconnectiontable [-Filter <Hashtable>] [-GetAll] [-ViewSummary] [<CommonParameters>]

Invoke-ADCGetNsconnectiontable [-Filterexpression <String>] [-Link <Boolean>] [-Filtername <Boolean>]
 [-Detail <String[]>] [-Listen <Boolean>] [-Nodeid <Double>] [-Filter <Hashtable>] [<CommonParameters>]

Invoke-ADCGetNsconnectiontable [-Count] [-Filter <Hashtable>] [<CommonParameters>]

Configuration for TCP/IP connection table resource.

Invoke-ADCGetNsconnectiontable

Get data.

Invoke-ADCGetNsconnectiontable -GetAll

Get all nsconnectiontable data.

Invoke-ADCGetNsconnectiontable -Count

Get the number of nsconnectiontable objects.

Invoke-ADCGetNsconnectiontable -name <string>

Get nsconnectiontable object by specifying for example the name.

Invoke-ADCGetNsconnectiontable -Filter @{ 'name'='<value>' }

Get nsconnectiontable data with a filter.

The maximum length of filter expression is 255 and it can be of following format: <expression> [<relop> <expression>] <relop> = ( ;; | || ) <expression> =: CONNECTION.<qualifier>.<qualifier-method>.(<qualifier-value>) <qualifier> = SRCIP <qualifier-method> = [ EQ | NE ] <qualifier-value> = A valid IPv4 address example = CONNECTION.SRCIP.EQ(127.0.0.1) <qualifier> = DSTIP <qualifier-method> = [ EQ | NE ] <qualifier-value> = A valid IPv4 address. example = CONNECTION.DSTIP.EQ(127.0.0.1) <qualifier> = IP <qualifier-method> = [ EQ | NE ] <qualifier-value> = A valid IPv4 address. example = CONNECTION.IP.EQ(127.0.0.1) <qualifier> = SRCIPv6 <qualifier-method> = [ EQ | NE ] <qualifier-value> = A valid IPv6 address. example = CONNECTION.SRCIPv6.EQ(2001:db8:0:0:1::1) <qualifier> = DSTIPv6 <qualifier-method> = [ EQ | NE ] <qualifier-value> = A valid IPv6 address. example = CONNECTION.DSTIPv6.EQ(2001:db8:0:0:1::1) <qualifier> = IPv6 <qualifier-method> = [ EQ | NE ] <qualifier-value> = A valid IPv6 address. example = CONNECTION.IPv6.EQ(2001:db8:0:0:1::1) <qualifier> = SRCPORT <qualifier-method> = [ EQ | NE | GT | GE | LT | LE | BETWEEN ] <qualifier-value> = A valid port number. example = CONNECTION.SRCPORT.EQ(80) <qualifier> = DSTPORT <qualifier-method> = [ EQ | NE | GT | GE | LT | LE | BETWEEN ] <qualifier-value> = A valid port number. example = CONNECTION.DSTPORT.EQ(80) <qualifier> = PORT <qualifier-method> = [ EQ | NE | GT | GE | LT | LE | BETWEEN ] <qualifier-value> = A valid port number. example = CONNECTION.PORT.EQ(80) <qualifier> = SVCNAME <qualifier-method> = [ EQ | NE | CONTAINS | STARTSWITH | ENDSWITH ] <qualifier-value> = service name. example = CONNECTION.SVCNAME.EQ("name") <qualifier> = LB_VSERVER.NAME <qualifier-method> = [ EQ | NE | CONTAINS | STARTSWITH | ENDSWITH ] <qualifier-value> = LB vserver name. example = CONNECTION.LB_VSERVER.NAME.EQ("name") <qualifier> = CS_VSERVER.NAME <qualifier-method> = [ EQ | NE | CONTAINS | STARTSWITH | ENDSWITH ] <qualifier-value> = CS vserver name. example = CONNECTION.CS_VSERVER.NAME.EQ("name") <qualifier> = INTF <qualifier-method> = [ EQ | NE ] <qualifier-value> = A valid interface id in the form of x/y (n/x/y in case of cluster interface). examle = CONNECTION.INTF.EQ("0/1/1") <qualifier> = VLANID <qualifier-method> = [ EQ | NE | GT | GE | LT | LE | BETWEEN ] <qualifier-value> = A valid VLAN ID. example = CONNECTION.VLANID.EQ(0) <qualifier> = CONNID <qualifier-method> = [ EQ | NE | GT | GE | LT | LE | BETWEEN ] <qualifier-value> = A valid PCB dev number. example = CONNECTION.CONNID.EQ(0) <qualifier> = PPEID <qualifier-method> = [ EQ | NE | GT | GE | LT | LE | BETWEEN ] <qualifier-value> = A valid core ID. example = CONNECTION.PPEID.EQ(0) <qualifier> = IDLETIME <qualifier-method> = [ EQ | NE | GT | GE | LT | LE | BETWEEN ] <qualifier-value> = A positive integer indicating the idletime. example = CONNECTION.IDLETIME.LT(100) <qualifier> = TCPSTATE <qualifier-method> = [ EQ | NE ] <qualifier-value> = ( CLOSE_WAIT | CLOSED | CLOSING | ESTABLISHED | FIN_WAIT_1 | FIN_WAIT_2 | LAST_ACK | LISTEN | SYN_RECEIVED | SYN_SENT | TIME_WAIT | NOT_APPLICABLE) example = CONNECTION.TCPSTATE.EQ(LISTEN) <qualifier> = SERVICE_TYPE <qualifier-method> = [ EQ | NE ] <qualifier-value> = ( SVC_HTTP | FTP | TCP | UDP | SSL | SSL_BRIDGE | SSL_TCP | NNTP | RPCSVR | RPCSVRS | RPCCLNT | SVC_DNS | ADNS | SNMP | RTSP | DHCPRA | NAT | ANY | MONITOR | MONITOR_UDP | MONITOR_PING | SIP_UDP | SVC_MYSQL | SVC_MSSQL | SERVICE_UNKNOWN ) example = CONNECTION.SERVICE_TYPE.EQ(ANY) <qualifier> = TRAFFIC_DOMAIN_ID <qualifier-method> = [ EQ | NE | GT | GE | LT | LE | BETWEEN ] <qualifier-value> = A valid traffic domain ID. example = CONNECTION.TRAFFIC_DOMAIN_ID.EQ(0) common usecases: Filtering out loopback connections and view present connections through netscaler show connectiontable "CONNECTION.IP.NE(127.0.0.1) ;; CONNECTION.TCPSTATE.EQ(ESTABLISHED)" -detail full show connections from a particular sourceip and targeted to port 80 show connectiontable "CONNECTION.SRCIP.EQ(10.102.1.91) ;; CONNECTION.DSTPORT.EQ(80)" show connection particular to a service and its linked client connections show connectiontable CONNECTION.SVCNAME.EQ("S1") -detail link show connections for a particular servicetype(e.g.http) show connectiontable CONNECTION.SERVICE_TYPE.EQ(TCP) viewing connections that have been idle for a long time show connectiontable CONNECTION.IDLETIME.GT(100) show connections particular to a service and idle for a long time show connectiontable "CONNECTION.SVCNAME.EQ(\\"S1\\") ;; CONNECTION.IDLETIME.GT(100)" show connections for a particular interface show connectiontable CONNECTION.INTF.EQ("1/1") show connections for a particular interface and vlan show connectiontable "CONNECTION.INTF.EQ(\\"1/1\\") ;; CONNECTION.VLANID.EQ(1)" .

Type: String
Parameter Sets: GetByArgument
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

Display link information if available.

Type: Boolean
Parameter Sets: GetByArgument
Aliases:

Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

Display name instead of IP for local entities.

Type: Boolean
Parameter Sets: GetByArgument
Aliases:

Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

Specify display options for the connection table.

• LINK - Displays the linked PCB (Protocol Control Block).
• NAME - Displays along with the service name.
• CONNFAILOVER - Displays PCB with connection failover.
• FULL - Displays all available details. Possible values = LINK, NAME, CONNFAILOVER, FULL, NNM, FULL+

Type: String[]
Parameter Sets: GetByArgument
Aliases:

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

Display listening services only.

Type: Boolean
Parameter Sets: GetByArgument
Aliases:

Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

Unique number that identifies the cluster node.

Type: Double
Parameter Sets: GetByArgument
Aliases:

Required: False
Position: Named
Default value: 0
Accept pipeline input: False
Accept wildcard characters: False

If specified, the count of the nsconnectiontable object(s) will be returned.

Type: SwitchParameter
Parameter Sets: Count
Aliases:

Required: True
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

Specify a filter. -Filter @{ 'name'='<value>' }

Type: Hashtable
Parameter Sets: (All)
Aliases:

Required: False
Position: Named
Default value: @{ }
Accept pipeline input: False
Accept wildcard characters: False

Retrieve all nsconnectiontable object(s).

Type: SwitchParameter
Parameter Sets: GetAll
Aliases:

Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

When specified, only a summary of information is returned.

Type: SwitchParameter
Parameter Sets: GetAll
Aliases:

Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False

This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.

File Name : Invoke-ADCGetNsconnectiontable Version : v2111.2521 Author : John Billekens Reference : https://developer-docs.citrix.com/projects/citrix-adc-nitro-api-reference/en/latest/configuration/ns/nsconnectiontable/ Requires : PowerShell v5.1 and up ADC 13.x and up. ADC 12 and lower may work, not guaranteed.

https://blog.j81.nl