D.3. Backward incompatible changes, not automatically converted - intel/device-modeling-language GitHub Wiki

A number of changes are not taken care of by the conversion script. Many incompatibilities can be captured as errors already in DML 1.2, by passing the --strict-dml12 argument. This can be used to split the conversion process into smaller steps: by running with this flag before running port-dml.py, one can apply manual fixes one by one and validate each fix in isolation; this means that the result of port-dml.py will contain fewer errors.

The following incompatible changes are caught as errors or warnings by the --strict-dml12 flag:

  • In classic DML 1.2, an unused template is allowed to instantiate a non-existing template. This is not permitted in DML 1.4.

  • In DML 1.4, $ is no longer used for object references, and top-level object scope is therefore merged with the global scope. This means that you cannot both declare a bank X (referenced as $X in 1.2, as X in 1.4) and a global constant X (referenced as X in both 1.2 and 1.4).

  • When inlining a method with a constant value as an argument, the argument will no longer be considered constant in the method body if the argument was declared with a type. In classic DML 1.2, a constant is always inlined as a constant, whose type might not match with the declared type.

  • Anonymous banks (syntax: bank { ... }) are no longer allowed.

  • DML 1.2 permitted certain C keywords, e.g. signed and register, to be used as names of local variables. This is no longer permitted.

  • Integer arithmetic works differently in DML 1.4. In short, all operands to arithmetic operands are promoted to 64 bits before performing the operation, much like 16- and 8-bit operands are promoted to 32 bits in C.

    Also, many semantic irregularities and bugs in 1.2 semantics have been corrected in 1.4.

  • It is no longer permitted to use a register or field object as operand to the ! operator. In classic DML 1.2, there was a loophole that permitted this.

  • In DML 1.2, you can reference a method in an interface object by casting it to a function pointer type. That is no longer permitted in DML 1.4.

  • The goto statement has been removed from DML 1.3. We plan to re-introduce a restricted variant of the goto statement which is only allowed to jump forward, and to an enclosing scope.

  • It is no longer allowed to iterate over the undocumented vect type in a select statement. In classic DML 1.2, this was permitted but had unexpected behaviour.

  • If a method argument has type const char *, it is no longer permitted to pass a string literal.

  • The ! operator is stricter in 1.3; in particular, it no longer accepts a constant integer as operand. Other condition expressions, like the if condition or && operands, no longer accept the 0 or 1 literal; use false or true instead.

  • In DML 1.4, the sizeof and typeof operators require that the operand is an lvalue.

  • A reference to an implement object can no longer be used as a value.

  • In classic DML 1.2, one could write extern X; to declare that some symbol X is externally defined as a C symbol, without providing a hint on the type of X. This is not permitted in DML 1.4.

  • The undocumented c_name parameter no longer has an effect on interface objects. This may affect old C + DML integrations.

  • A method's input parameters now belong to the method's top scope, instead of a separate scope. Thus, it is illegal to declare a variable in method's top scope which shadows a method parameter.

  • In classic DML 1.2, the loggroup X; statement would expose the log group as an identifier X in generated C code. This is no longer done, which may affect old C + DML integrations.

The following incompatible changes are not caught by --strict-dml12, and must be adjusted manually:

  • The API for initialization and reset has been rewritten. The most important differences:

    • When the device is initialized, all registers are reset to the new init_val parameter, defaulting to zero. In 1.2, similar results were achieved by performing a hard reset.

    • The hard_reset and soft_reset methods in banks and devices, typically called to trigger a reset, are no longer available by default. The methods can be created by instantiating templates from the utility.dml library (the templates are named hreset and sreset, respectively).

    • The hard_reset and soft_reset methods in registers and fields also do not exist by default. They are also created when instantiating hreset and sreset templates.

    • The hard_reset_value and soft_reset_value parameters in registers and fields are no longer recognized. Instead, the default implementations of the hard_reset and soft_reset methods invoke the init method, effectively replacing the hard_reset_value and soft_reset_value parameters with init_val. You must now override the soft_reset method explicitly in order to provide different reset values for hard and soft reset.

  • The API for declaring event objects has changed. Just like in DML 1.2, the event callback is defined by a method event, and the event is posted by a method post. A number of things have changed since 1.2:

    • Instead of defining a parameter timebase in each event object, you must now instantiate one of six predefined templates in each event object:

      simple_time_event, simple_cycle_event

      Event without data. The event method takes no arguments, and the post method only takes a single argument, the delay.

      uint64_time_event, uint64_cycle_event

      Event with integer data. The post method takes an argument of type uint64 in addition to the delay argument. This argument is later passed on to the event method, which takes a single uint64 argument.

      custom_time_event, custom_cycle_event

      Event with custom data. The post method takes an argument of type void * in addition to the delay argument. This value is later passed on to the event method, which takes a single void * argument.

      The difference between the *_time_event and *_cycle_event templates is similar to the difference between timebase = "seconds" and timebase = "cycles" in DML 1.2. I.e., when a method argument or return value represents time, then the variant of the method in a *_time_event template represents time as a floating-point number, representing (simulated) seconds, whereas the variant in a *_cycle_event template represents time as an integer, representing CPU cycles.

    • The method event is abstract in all templates. In DML 1.2, there was a not-so-useful default implementation.

    • The methods next, posted and remove are not available in the custom_*_event templates. They are available in the simple_*_event templates without data arguments, and in uint64_*_event templates with data arguments of type uint64.

    • The methods set_event_info, get_event_info and destroy are only recognized by the custom_*_event templates, where the methods are abstract. In the other templates, serialization and deserialization are done automatically

    • The describe_event method can no longer be overridden.

    • The post_on_queue method is no longer available.

    Example:

    event simple is (simple_time_event) {
  method event() {
    log info: "hello";
  }
}
event parameterized is (uint64_cycle_event) {
  method event(uint64 data) {
    log info: "hello %d", data;
  }
}
...
// no data args needed
simple.post(1.0);
assert simple.posted();
// in uint64_cycle_event, the methods posted, next
// and remove check that the data argument matches
parameterized.post(18, 4711);
assert parameterized.next(4711) == 18;
assert parameterized.next(42) < 0;

  • The parameters partial and overlapping in banks are now true by default.

  • Some rarely used identifiers from C, in particular many C macros on the form XYZ_INTERFACE, are no longer automatically available in DML. This will cause compile errors on migration, which can be resolved by manually adding corresponding symbol definitions to the DML file.

  • Methods that can throw an exception must be annotated with the new throws keyword:

    method m(bool condition) -> (int) throws {
    if (condition)
        throw;
}

    The throws annotation is required if the method contains either a throw statement or an invocation of a method with the throws annotation, unless all such statements are enclosed in try blocks.

  • Assignment operators (= as well as +=, *=, etc) are now separate statements, and disallowed inside expressions. These statements are allowed in some additional places, to replace common uses of assignment expressions:

    • A = statement may contain multiple target expressions (a = b = c;). The targets are assigned from right to left, like in C.

    • The pre and post sections of a for statement may contain any assignment statement. So the following is still valid:

      for (i = j = 0; i < 10; i += 3, j++) { ... }

  • In DML 1.4, methods are no longer declared extern, rather they are exported using the export statement. An exported method must be declared in the top scope, may not throw exceptions, and may have at most one return value. The generated C function now has extern linkage, and takes a conf_object_t * as its first argument.

  • The syntax of switch statement is now stricter, and now requires a conventional switch structure: The switch body must be a compound statement starting with a case label, all case and default statements must reside directly in this statement, and no case may appear after the default statement.

  • When declaring a template, a desc string may no longer be supplied. Thus, the following is now invalid:

    template t "short description" { ... }

    This syntax used to create a parameter desc in the objects where the template is instantiated.

  • The # operator is no longer supported. It was seldom useful in DML 1.2, and its behaviour was in many ways complex and undocumented.

  • It is no longer allowed to refer to objects using the names signed, unsigned and this.

  • The expression undefined may no longer be passed as argument to an inline method

  • If the condition of a while loop is statically evaluated to false, then faulty code in the loop body can cause compile errors in DML 1.4. In DML 1.2, the loop body was silently discarded.

  • goto statements, as well as goto labels, are not allowed in DML 1.4.

  • The parameter persistent in fields is no longer supported. It was buggy in 1.2. As a replacement, checkpoint fields as separate attributes if persistence differs within a register.

  • Objects of register or attribute type with configuration="pseudo", that are either read-only or write-only, have to declare this specifically by setting the new parameter readable (or writable) to false. In 1.2, DMLC used some heuristics to automatically guess the user's intent.

  • The parameter allocate_type in attribute objects has been removed. Three templates are available as a replacement:

    • uint64_attr replaces allocate_type="uint64"

    • int64_attr replaces allocate_type="int64"

    • bool_attr replaces allocate_type="bool"

    • double_attr replaces allocate_type="double"

    For the allocate_type values "uint8", "uint16", "uint32", "int8", "int16", and "int32", the corresponding 64-bit template is recommended. There is no replacement for allocate_type="string".

  • In objects of type attribute, register and field, storage is now allocated in a separate member val instead of the object itself. For example: when assigning a value to a register, you might change bank.reg = 4; into bank.reg.val = 4;. Note that the val member is not automatically created by DMLC; it is merely a naming convention used by many standard templates (type_attr for attributes, and alloc, read_write, read_only for registers and fields).

  • The following standard parameters have been removed:

    Object parameters

    logobj, indexvar

    bank parameters

    mapped_registers, unmapped_registers, numbered_registers

    register parameters

    fields, signed

    connect parameters

    interfaces

  • The bank parameters miss_bank, miss_bank_offset, miss_pattern, function and log_group have been tentatively removed; we intend to replace them with standard templates.

  • In connect objects, the validate and validate_port methods have been merged into one method, named validate. This method has the same signature and semantics as validate_port in DML 1.2.

  • In objects of type attribute, register and connect, the methods before_set and after_set are no longer recognized. As a replacement, override set with a method that performs intended logic before and after an invocation of default.

  • The templates signed and noalloc have been removed, together with the signed and allocate parameters in registers and fields.

  • The parameter offset in registers can no longer be set to undefined. Instead, use the unmapped template to denote an unmapped register.

  • The templates unimplemented, silent_unimplemented, read_unimplemented and write_unimplemented have been renamed, to unimpl, silent_unimpl, read_unimpl and write_unimpl, respectively. Also, log levels of logged messages have changed: The first message is logged on level 2 by silent_unimpl, and level 1 by all the other templates, while subsequent messages are logged on level 3 in all templates.

⚠️ **GitHub.com Fallback** ⚠️