Grout Trowel - infrawiki/infrawiki GitHub Wiki
Project developed by Eric Hecht
When spreading grout for tiling in areas like the kitchen or bathroom a normal tool may prove to be to large and unwieldy. My landlord asked for a cheap 3D printable tool that could fufill three tasks. The first main taks and what this tool is made for is spreading grout for tiling. However there are two other functions that you can use this for: smoothing concrete, and spackling. Those secondary applications won't work as well as a dedicated tool but this tool can still perform them. And as a bonus function you can table sandpaper to the bottom of this and use it as a sanding aparatues if you are lacking a powersander!
Dimensions: This is a small trowel designed for tight areas. The notches are .25in by .25in. LxW 6inx3in
A comparable trowel can be found here: https://www.wallsandfloors.co.uk/catrangetiles/tools-for-tiling/rubi-tools/6mm-x-6mm-square-notched-flex-grip-trowel/14376/
CAD files of parts Files found here
STL
Scad Purchased materials- 1kg of White PLA Filament
- N/A
-Overall tool base dimensions Length and Width are 6in by 3in.
- The Grout Trowel
- Layer Height: 0.15 mm
- Top/Bottom layer thickness: 0.75 mm
- Shell Thickness: 2
- Fill Density: 100%
- Printer Speed: 30 mm/s
- Travel Speed: 50 mm/s
-Assembly
- N/A
- If printed without a raft the corners may warp upwards due to heat and not enough proper adhesion to the base. Either add a raft of go more carefully over the surface area with glue.
- 61 g of PLA filament were used which was a total cost of $1.20 at $20.12 for 1 kg of PLA filament
- Grout Trowel can range in price from $5.00 to $25.00
- The cost savings would be $3.80 to $23.80
- The cost savings in percent would be 76% to 95.2%
category:OSAT 3D-Printable Designs Category:Construction Category:Concrete Category:Construction and Materials