Garlic crusher - infrawiki/infrawiki GitHub Wiki

Table of Contents Abstract Bill of Materials Tools needed for fabrication of the OSAT Skills and Knowledge Necessary to Make the OSAT Technical Specifications and Assembly Instructions Cost savings

1. A handy device for use in kitchen. Easy to use and simple in handling
2. Picture of completed print using right

1. Provide a full BOM -- Materials needed for fabrication of device and alternative materials if they are not available, prices/sources of non-printable parts
   1. Upload and link to all source files from open source CAD
   2. Upload and link to all STLs

1. MOST Delta RepRap or similar RepRap 3-D printer

• Basic understanding of how this works and what shape is best.
• FreeCAD designing basics

1. Its a two piece model and needs no assembly
2. Place the larger bottom piece and fill half or less with raw garlic
3. Close the lid and give clockwise and anti-clockwise motion, number of rotations may depend on how smooth you wish to garnish

• Market price may vary depending upon brand and availability.

1. Requires approximately 70gm of PLA - ($1.61 at the rate of $23 per Kg of PLA)
2. Commercially its available at $7-10 on average
3. Calculate $8.39 and 84% savings