Garden water sprinkler - infrawiki/infrawiki GitHub Wiki

Table of Contents Title of the device or system Abstract Bill of Materials Tools needed for fabrication of the OSAT Skills and Knowledge Necessary to Make the OSAT Technical Specifications and Assembly Instructions Common Problems and Solutions Cost savings References

 Garden water sprinkler [by Shyam Sanjeevi]

You can help Appropedia by contributing to the next step in this OSAT's status.

1. This garden water sprinkler can be easily used to sprinkle water on a certain given region of garden by inserting a jet stream of water.
2. Picture of completed print using 300px
3. The same print can be scaled up and made big for large garden areas.

1. Requires less than 50gm of PLA to print this in full scale, estimated cost is the cost of material only. Comes out to be 1.10$

1. MOST Delta RepRap or similar RepRap 3-D printer

• Understanding of sprinkler system and basic designing skills using Openscad or Freecad

1. Download the Openscad file or .stl file from the Thingiverse website.
2. Load the file in Cura and scale it to required size according to use.
3. This print needs support at some portions because it is hanging and may not form properly without support.
4. Size of the entrance nozzle to be modified according to hose pipe and can be done easily by changing nozzle radius.
5. Faster the hose pipe tightly onto the nozzle ensuring no leakage, and as the print is one piece there is no problem of it tearing apart or breaking down.

 Link to Thingiverse with scad and stl files.
 [|http://www.thingiverse.com/thing:1182839]]

• The basic weight of the print is less to withstand the force of incoming water, some external installation to be used to keep in position.

• Easy to redesign and make required shape and size.

1. 1.10$ for full scale of print.

• Some types of water sprinklers.