ME Multi Controller - indiscrete-void/Applied-Integrations GitHub Wiki

ME Multi-Controller is a mutli-block with size from 3x3x3 to 7x7x7. It used to share various content of it's main network connected trough ME multi-controller rib to adjacent network(s) connected trough ME multi-controller ports.

Right clicking any rib of formed ME multi-controller will open it's GUI. All slots with network card in background is used to store network cards. There is 30 slots for network cards. If placed network card(s) has any written data, then ME multi-controller will apply this to network written in network card.

ME multi-controller can share these types of network content:

  • Network storage
  • Crafting patterns
  • Crafting CPU(s)

Construction
Construction of this multi-block is pretty easy, it's central block should be ME multi-controller core

Shape of this multi-block is rectangular. ME multi-controller rib should be placed in place of all geometrical ribs and corners of this multi-block. Each edge of this multi-block can be filled with both ME multi-controller port and ME multi-controller housing. Central "axis" blocks on each edge must be port

Configuration
To configure me multi-controller you should reproduce these steps:

  1. Create network card and click with it on any port of ME multi-controller, it will configure this card to work with this port.
  2. Put configured card into ME multi-controller terminal
  3. Configure matter-filters for port in card with UI of ME M.C. Terminal
  4. Remove network card from ME M.C. Terminal and put it into UI of ME multi-controller (to open it's UI just click on any rib of formed multi-controller)
  5. Try to inject/extract/craft some matter from configuration in network card in network from configured card, if all configured matter types are accessed properly, then your configuration is done.

Gui