Agenda for GENSIM Workshop, October 2016
This page contains the agenda and links to slides for the GENSIM workshop.
Slides are linked from the agenda below, and all slides,
instructions for hands-on examples and models
can also be accessed at https://github.com/ibpsa/project1/tree/master/meetings/2016-10-24-gensim.
See also the software installation page.
The meeting is at the Salle de Spectacle.
| Time |
Description |
Presenter |
Downloads |
|---|
| 10:30 |
|
Michael Wetter, LBNL
|
|
| 12:30 |
Lunch
|
|
|
| 14:00 |
Continuation of Modelica training |
Michael Wetter, LBNL |
|
| 15:30 |
Break |
|
|
| 16:00 |
Annex 60 library hands-on training (heat transfer, fluid flow, controls, HVAC) |
Filip Jorissen, KU Leuven |
|
| 18:00 |
Adjourn |
|
|
Tuesday, October 25, 2016
| Time |
Description |
Presenter |
Downloads |
|---|
| 8:30 |
Modelica presentation: Advanced concepts:
- Algebraic loops and how to avoid them.
- Practical applications of these guidelines for the configuration of hydronic and air flow circuits,
and for steady-state and dynamic balances.
- Practical applications of these guidelines for flow reversal.
- How to choose integrator.
|
Filip Jorissen, KU Leuven
|
Slides.
|
| 10:00 |
Break
|
|
|
| 10:30 |
- TEASER workshop for ROM modeling.
- Coupled building and HVAC modeling, hands-on training using Annex 60 library.
|
Moritz Lauster, RWTH Aachen |
|
| 12:30 |
Lunch |
|
|
| 14:30 |
FMI and co-simulation presentation and hands-on training. |
Michael Wetter, LBNL |
Slides.
|
| 15:30 |
Break |
|
|
| 16:00 |
Hands-on training for how to build a system model, following
Boiler model tutorial. |
Michael Wetter, LBNL |
|
| 17:00 |
Continue Annex 60 library hands-on training, drawing examples from some libraries, such as IDEAS for use of advanced concepts. |
Filip Jorissen, KU Leuven |
|
| 18:00 |
Break |
|
|
| 18:30 |
Poster session |
|
|
| 19:30 |
Adjourn |
|
|
Wednesday, October 26, 2016
| Time |
Description |
Presenter |
Downloads |
|---|
| 8:30 |
Modelica Library presentation (15 min. each):
- Buildings (LBNL)
- AixLib (RWTH Aachen)
- IDEAS (KU Leuven)
- BuildingSystems (Universitaet der Kuenste Berlin)
- BuildSysPro (EdF)
Discussion.
|
- Michael Wetter, LBNL
- Moritz Lauster, RWTH Aachen
- Filip Jorissen, KU Leuven
- Matthis Thorade, UdK Berlin
- Mathieu Schumann, EDF
|
|
| 10:00 |
Break
|
|
|
| 10:30 |
- BIM/GIS presentation.
- BIM training or demonstration.
|
Matthis Thorade, Universitaet der Kuenste Berlin |
BIM/GIS slides.
|
| 12:30 |
Lunch |
|
|
| 14:00 |
Hike/walk, until around 18:00. |
|
|
Thursday, October 27, 2016
| Time |
Description |
Presenter |
Downloads |
|---|
| 8:30 |
From building to district energy assessment - stochasticity and flexibility
in a bottom-up approach.
- Benefits and challenges of building design evaluation on a district level.
- Stochastic occupant behavior and energy flexibility.
|
Glenn Reynders, KU Leuven |
Slides.
|
| 10:00 |
Break
|
|
|
| 10:30 |
Workshop/training on district energy modeling.
Neighborhood case study simulated with IDEAS library.
|
Glenn Reynders, KU Leuven |
|
| 12:30 |
Lunch |
|
|
| 15:00 |
Modelica model use in building operation: Lessons from Annex 60. |
Raymond Sterling, Nat. Univ. of Ireland |
Slides.
|
| 16:30 |
Break |
|
|
| 17:00 |
Workshop: applications and case studies.
- DACCOSIM, open-source co-simulation master platform.
- Workflow automation tool.
- Exporting and importing FMUs.
|
- Jean-Philippe Tavella, EdF
- Simon Roucher, LOCIE
- Michael Wetter, LBNL
|
|
| 19:00 |
Adjourn |
|
|
| Time |
Description |
Presenter |
Downloads |
|---|
| 9:00 |
Continuation of IEA EBC Annex 60 as IBPSA Project 1.
|
Michael Wetter, LBNL |
Slides.
|
| 9:45 |
Round table discussion about Project 1, GENSIM and the Modelica/FMI ecosystem.
|
|
|
| 11:00 |
Adjourn |
|
|