Create image with build self install mode - henrikstengaard/hstwb-installer GitHub Wiki

This tutorial describes step by step how to create an image using build self install mode.

1. Start HstWB Installer Setup

Start HstWB Installer Setup from start menu or powershell.

Type 1 and enter for select image menu.

build_install_1.png

2. Create a new image

Type 2 and enter for create image directory from image template menu.

build_install_2.png

3. Pick an image template that matches your needs

For this example type 4 and enter for '4GB: HDF RDB, DH0 (300MB/PFS3), DH1 (3300MB/PFS3)' image template. Note: Option numbers depend on the images installed in HstWB Installer "images" directory, so they may vary.

build_install_3.png

4. Select a directory to create new image

For this example create and select 'C:\Temp\4GB' directory.

build_install_4.png

Press enter to continue when extraction of image files is done.

build_install_5.png

Type 3 and enter for back to main menu.

build_install_6.png

5. Configure packages that will be installed on the image

Type 4 and enter for configure packages menu.

build_install_7.png

For this example type 1 and enter, 11 and enter, 9 and enter, 7 and enter to install packages: BetterWB, HstWB, EAB WHDLoad Games AGA Menu, EAB WHDLoad Demos AGA Menu. Note: Option numbers depend on the packages installed in HstWB Installer "packages" directory, so they may vary.

build_install_8.png

Type 12 and enter for back to main menu.

build_install_9.png

6. Switch install mode to build self install

Type 6 and enter for configure installer menu.

build_install_10.png

Type 1 and enter for change installer mode.

build_self_install_1.png

Type 2 and enter for build self install mode.

build_self_install_2.png

Type 2 and enter for back to main menu.

build_self_install_3.png

7. Run installer

Type 7 end enter to run installer.

build_self_install_4.png

8. HstWB Installer preparing and launching WinUAE

HstWB Installer Run prepares installation and launches WinUAE to start installation process.

build_self_install_5.png

9. Installation process running

Installation process installing system files for self install and packages.

build_self_install_6.png

Installation process is done and will automatically close WinUAE after 10 seconds.

build_self_install_7.png

10. Installation process done

Image is now ready for self install in an emulator or on real Amiga.

Press enter to continue and it will return to main menu.

build_self_install_8.png

⚠️ **GitHub.com Fallback** ⚠️