Contents 1. [**1** Status](macportsonpuredarwin.html#TOC-Status) 2. [**2** Getting MacPorts](macportsonpuredarwin.html#TOC-Getting-MacPorts) 1. [**2.1** Fetching MacPorts in a PureDarwin VM](macportsonpuredarwin.html#TOC-Fetching-MacPorts-in-a-PureDarwin-VM) 1. [**2.1.1** Via Network](macportsonpuredarwin.html#TOC-Via-Network) 2. [**2.1.2** Local copy](macportsonpuredarwin.html#TOC-Local-copy) 3. [**3** Building MacPorts](macportsonpuredarwin.html#TOC-Building-MacPorts) 1. [**3.1** Compiling MacPorts in a PureDarwin vm](macportsonpuredarwin.html#TOC-Compiling-MacPorts-in-a-PureDarwin-vm) 1. [**3.1.1** configure](macportsonpuredarwin.html#TOC-configure) 2. [**3.1.2** make](macportsonpuredarwin.html#TOC-make) 3. [**3.1.3** make install](macportsonpuredarwin.html#TOC-make-install) 2. [**3.2** Compiling MacPorts 1.7.0 in DarwinBuild](macportsonpuredarwin.html#TOC-Compiling-MacPorts-1.7.0-in-DarwinBuild) 4. [**4** Running MacPorts](macportsonpuredarwin.html#TOC-Running-MacPorts) 1. [**4.1** Running a compiled MacPorts on PureDarwin](macportsonpuredarwin.html#TOC-Running-a-compiled-MacPorts-on-PureDarwin) 1. [**4.1.1** port selfupdate](macportsonpuredarwin.html#TOC-port-selfupdate) 2. [**4.1.2** port install most](macportsonpuredarwin.html#TOC-port-install-most) 2. [**4.2** Compiling MacPorts in PureDarwin](macportsonpuredarwin.html#TOC-Compiling-MacPorts-in-PureDarwin) 5. [**5** Deprecated stuff](macportsonpuredarwin.html#TOC-Deprecated-stuff) 1. [**5.1** Compiling MacPorts 1.7.1 in a PureDarwin chroot](macportsonpuredarwin.html#TOC-Compiling-MacPorts-1.7.1-in-a-PureDarwin-chroot) 2. [**5.2** Deprecated (Compiling MacPorts 1.6.0 on DarwinBuild)](macportsonpuredarwin.html#TOC-Deprecated-Compiling-MacPorts-1.6.0-on-DarwinBuild-) 6. [**6** Quick method: Install MacPorts on PureDarwin using the binary pkg provided by the MacPorts project](macportsonpuredarwin.html#TOC-Quick-method:-Install-MacPorts-on-PureDarwin-using-the-binary-pkg-provided-by-the-MacPorts-project) 7. [**7** Resources](macportsonpuredarwin.html#TOC-Resources)

MacPorts is functional on PureDarwin 9 using the "quick method" at the end of this page.

MacPorts 1.8.0 states depending its host. ----------------------------------------------------------------------------------------------------------- ----------------------------------------------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------------- -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------    Mac OS X  DarwinBuild  PureDarwin  build and deployement   YES  YES  YES  port fetch <port>  YES  YES  **YES (OK in QEMU or real hardware, missing Network support in VMware)**  **port install <port>**  **YES**  **YES**  **YES** **/opt/local/[...]/<port>**  YES  YES  **YES** ----------------------------------------------------------------------------------------------------------- ----------------------------------------------------------------------------------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------------------------------------------- -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

As an example, the fortune project (one workaround consists to fetch the source only in a puredarwin chroot where the network is available from Mac OS X or to use QEMU user mode network stack ) built and run:

Notes: On Mac OS X (the host and build environment), darwinbuild comes from macports (port install darwinbuild). And in the custom plist of darwinbuild, there is an entry for MacPorts 1.7.0, in order to install it in the BuildRoot (the guest and pseudo darwin environement) of darwinbuild. Then, in the BuildRoot, the freshly installed MacPorts project could be used to install the DarwinBuild project inside. "Infinite loop" makes sense. To illustrate:

With QEMU user mode network stack, retrieve MacPorts sources via curl 

Opening the archive file in rw (.vmdk, .iso, etc..), and drop the source inside.

Do not remove headers and others needed files in `pd_setup' stages.

External requirements (built in MacPorts): tar xjvf /opt/local/var/macports/packages/darwin/i386/tcl-8.5.6_0+threads.i386.tbz2

It will not be missing in the future releases, but in case for `env':

CFLAGS=-I/opt/local/include LDFLAGS=-L/usr/local/lib

In order to provide the famous Availability.h (part of Carbon which has been released (thx Apple!) as headers) needed by many projects in darwinbuild: tar xzvf /Users/aladin/PureDarwin/darwinbuild/9J61/Packages/CarbonHeaders.hdrs.tar.gz tar xzvf /Users/aladin/PureDarwin/darwinbuild/9J61/Packages/CarbonHeaders.root.tar.gz (if there is a diff)

Without X11:

TCLSH=/opt/local/bin/tclsh ./configure --without-objc-foundation --without-objc-runtime  --without-x  --with-tcl=/opt/local/lib --with-tclinclude=/opt/local/include --with-included-tclthread

With X11 from MacPorts:

tar xjvf /opt/local/var/macports/packages/darwin/i386/xorg-libX11-1.1.5_1+x11_xcb.i386.tbz2 TCLSH=/opt/local/bin/tclsh ./configure --without-objc-foundation --without-objc-runtime --with-x --x-includes=/usr/X11R6/include/ --x-libraries=/usr/X11R6/lib/ --with-tcl=/opt/local/lib --with-tclinclude=/opt/local/include --with-included-tclthread

A first interesting way is to use the DarwinBuild project to build (and package) MacPorts for PureDarwin.

This is a work in progress, a new entry in a custom plist is needed:

MacPorts = { "source_sites" = (                          "http://puredarwin.googlecode.com/svn/Mirror", "http://svn.macports.org/repository/macports/downloads/MacPorts-1.7.0", ); version = 1.7.0; }; Problem: /Volumes/Builds/9G55/BuildRoot/private/var/tmp/MacPorts/MacPorts-1.7.0.root is empty. Build verification failed. How can we tell to darwinbuild to configure & make the project (except the way consisting of repackaging the archive with a custom makefile (makefile is autodetected by darwinbuild))? Solution: Please, let us know if you have one.

We can continue the compilation process by hand for now..

cd /Volumes/Builds/9G55/BuildRoot TCL is a must for MacPorts. tar xjvf /opt/local/var/macports/packages/darwin/i386/tcl-8.5.6_0+threads.i386.tbz2 Obviously, we need curl. tar xjvf /opt/local/var/macports/packages/darwin/i386/curl-7.19.2_0+ipv6.i386.tbz2

or

cd .. && darwinbuild -init 9G55pd1 darwinbuild curl && darwinbuild -load curl && cd BuildRoot

Why not? tar xjvf /opt/local/var/macports/packages/darwin/i386/XFree86-4.7.0_0+macosx+puredarwin.i386.tbz2 tar xjvf /opt/local/var/macports/packages/darwin/i386/xorg-libX11-1.1.5_1+x11_xcb.i386.tbz2 Then the configure step(s).. chroot . cd SourceCache/MacPorts/MacPorts-1.7.0 mount -t devfs devfs /dev ln -s /opt/local/bin/tclsh /usr/bin/ ./configure --without-objc-foundation --with-x --x-includes=/usr/X11R6/include/ --x-libraries=/usr/X11R6/lib/ --with-tcl=/opt/local/lib --with-tclinclude=/opt/local/include --with-included-tclthread

[...] configure: creating ./config.status config.status: creating Makefile config.status: creating pkgIndex.tcl make

[...] ===> making all in src/port

sed -e 's,@TCLSH@,/usr/bin/tclsh,g' -e 's,@TCL_PACKAGE_DIR@,/opt/local/lib/tcl8.5,g' portmirror.tcl > portmirror sed -e 's,@TCLSH@,/usr/bin/tclsh,g' -e 's,@TCL_PACKAGE_DIR@,/opt/local/lib/tcl8.5,g' portindex.tcl > portindex sed -e 's,@TCLSH@,/usr/bin/tclsh,g' -e 's,@TCL_PACKAGE_DIR@,/opt/local/lib/tcl8.5,g' port.tcl > port ===> making all in src/programs make install [...]

/usr/bin/tclsh src/dep_map_clean.tcl /opt/local/lib/tcl8.5 Congratulations, you have successfully installed the MacPorts system. To get the Portfiles and update the system, run: sudo port -v selfupdate Please read "man port", the MacPorts guide at http://guide.macports.org/ and Wiki at http://trac.macports.org/ for full documentation. Stray sources might have been left in the legacy /opt/local/var/db/dports directory after this upgrade, which moved most of what it could to /opt/local/var/macports, so you might want to look in the former and cleanup manually.

o/ yeah!

port MacPorts 1.700 Entering interactive mode... ("help" for help, "quit" to quit) [MacPorts/MacPorts-1.7.0] > version Version: 1.700

[MacPorts/MacPorts-1.7.0] > ^D Goodbye

More commands soon.. 

port installed No ports are installed.

port selfupdate

MacPorts base version 1.700 installed Downloaded MacPorts base version 1.700

The MacPorts installation is not outdated so it was not updated

In conclusion, `port' command should be able to run in a PureDarwin system. cd /Volumes/Builds/9G55/ darwinbuild bzip2 && darwinbuild -load bzip2 chroot BuildRoot port install fortune ---> Extracting fortune ---> Applying patches to fortune ---> Configuring fortune ---> Building fortune ---> Staging fortune into destroot ---> Installing fortune @6.2.0-RELEASE_0 ---> Activating fortune @6.2.0-RELEASE_0 Error: Target org.macports.activate returned: Image error: fortune @6.2.0-RELEASE_0 not installed as an image. Error: Status 1 encountered during processing. *** Problem *** Solution: Please, let us know if you know how to avoid this error. Pseudo-solution: To circumvent (unfortunately not for all ports (e.g., fortune)) the "activation error" (see above in this page), change the type of installation to do for ports from portinstalltype image to portinstalltype direct This problem (hopefully) cannot be reproduced in a real running PureDarwin system.

The next step involves network support (but could be also done via a local repository (see MacPorts documentation for more information)), which is at this time only functional via QEMU user mode network stack and some workaround.

The end of the selfupdate process should look like:

For more information, see the Using MacPorts page. As an example with a port called `most' which is built (+ deps) then run:

# port install most --->  Fetching gperf --->  Attempting to fetch gperf-3.0.4.tar.gz from http://www.mirrorservice.org/sites/ftp.gnu.org/gnu/gperf --->  Verifying checksum(s) for gperf --->  Extracting gperf --->  Configuring gperf --->  Building gperf --->  Staging gperf into destroot --->  Packaging tbz2 archive for gperf 3.0.4_0 --->  Installing gperf @3.0.4_0 --->  Cleaning gperf --->  Fetching libiconv --->  Attempting to fetch libiconv-1.13.tar.gz from http://www.mirrorservice.org/sites/ftp.gnu.org/gnu/libiconv --->  Verifying checksum(s) for libiconv --->  Extracting libiconv --->  Applying patches to libiconv --->  Configuring libiconv --->  Building libiconv --->  Staging libiconv into destroot --->  Packaging tbz2 archive for libiconv 1.13_0 --->  Installing libiconv @1.13_0 --->  Cleaning libiconv --->  Fetching zlib --->  Attempting to fetch zlib-1.2.3.tar.bz2 from http://mesh.dl.sourceforge.net/libpng --->  Verifying checksum(s) for zlib --->  Extracting zlib --->  Applying patches to zlib --->  Configuring zlib --->  Building zlib --->  Staging zlib into destroot --->  Packaging tbz2 archive for zlib 1.2.3_2 --->  Installing zlib @1.2.3_2 --->  Cleaning zlib --->  Fetching libpng --->  Attempting to fetch libpng-1.2.37.tar.bz2 from http://mesh.dl.sourceforge.net/libpng --->  Verifying checksum(s) for libpng --->  Extracting libpng --->  Configuring libpng --->  Building libpng --->  Staging libpng into destroot --->  Packaging tbz2 archive for libpng 1.2.37_0 --->  Installing libpng @1.2.37_0 --->  Cleaning libpng --->  Fetching bzip2 --->  Attempting to fetch bzip2-1.0.5.tar.gz from http://www.bzip.org/1.0.5 --->  Verifying checksum(s) for bzip2 --->  Extracting bzip2 --->  Applying patches to bzip2 --->  Configuring bzip2 --->  Building bzip2 --->  Staging bzip2 into destroot --->  Packaging tbz2 archive for bzip2 1.0.5_2 --->  Installing bzip2 @1.0.5_2 --->  Cleaning bzip2 --->  Fetching ncursesw --->  Attempting to fetch ncurses-5.7.tar.gz from http://www.mirrorservice.org/sites/ftp.gnu.org/gnu/ncurses --->  Verifying checksum(s) for ncursesw --->  Extracting ncursesw --->  Configuring ncursesw --->  Building ncursesw --->  Staging ncursesw into destroot --->  Packaging tbz2 archive for ncursesw 5.7_0 --->  Installing ncursesw @5.7_0 --->  Cleaning ncursesw --->  Fetching ncurses --->  Verifying checksum(s) for ncurses --->  Extracting ncurses --->  Configuring ncurses --->  Building ncurses --->  Staging ncurses into destroot --->  Packaging tbz2 archive for ncurses 5.7_0 --->  Installing ncurses @5.7_0 --->  Cleaning ncurses --->  Fetching readline --->  Attempting to fetch readline-6.0.tar.gz from http://www.mirrorservice.org/sites/ftp.gnu.org/gnu/readline --->  Verifying checksum(s) for readline --->  Extracting readline --->  Applying patches to readline --->  Configuring readline --->  Building readline --->  Staging readline into destroot --->  Packaging tbz2 archive for readline 6.0.000_1 --->  Installing readline @6.0.000_1 --->  Cleaning readline --->  Fetching pcre --->  Attempting to fetch pcre-7.9.tar.bz2 from http://mesh.dl.sourceforge.net/pcre --->  Verifying checksum(s) for pcre --->  Extracting pcre --->  Configuring pcre --->  Building pcre --->  Staging pcre into destroot --->  Packaging tbz2 archive for pcre 7.9_0 --->  Installing pcre @7.9_0 --->  Cleaning pcre --->  Fetching slang2 --->  Attempting to fetch slang-2.1.4.tar.bz2 from ftp://ftp.plig.org/pub/slang/v2.1/ --->  Attempting to fetch slang-2.1.4.tar.bz2 from http://trd.no.distfiles.macports.org/slang2 --->  Attempting to fetch slang-2.1.4.tar.bz2 from ftp://ftp.ntua.gr/pub/lang/slang/slang/v2.1/ --->  Verifying checksum(s) for slang2 --->  Extracting slang2 --->  Configuring slang2 --->  Building slang2 --->  Staging slang2 into destroot --->  Packaging tbz2 archive for slang2 2.1.4_0 --->  Installing slang2 @2.1.4_0 --->  Cleaning slang2 --->  Fetching most --->  Attempting to fetch most-5.0.0a.tar.bz2 from http://trd.no.distfiles.macports.org/most --->  Attempting to fetch most-5.0.0a.tar.bz2 from ftp://space.mit.edu/pub/davis/most/ --->  Verifying checksum(s) for most --->  Extracting most --->  Configuring most --->  Building most --->  Staging most into destroot --->  Packaging tbz2 archive for most 5.0.0a_1 --->  Installing most @5.0.0a_1 --->  Cleaning most # most MOST version 5.0.0 (S-Lang version 2.1.4) Usage: most [-1Cbcdkstvw] [+/string] [+line number] [+s] [+d] file... [...]

Troubleshooting

Problem: /usr/include/sys/stat.h:75:26: error: Availability.h: No such file or directory There is a new CarbonHeaders-9G55 posted which adds the rest of the Availability*.h headers that were missing. Install it. Solution: cd /Volume/PureDarwin

tar xzvf [...]9J61/Packages/CarbonHeaders.hdrs.tar.gz

tar xzvf [...]9J61/Packages/CarbonHeaders.root.tar.gz

Problem: /usr/bin/tclsh src/dep_map_clean.tcl /opt/local/lib/tcl8.5

Depending the case, the archive can come from DarwinBuild or MacPorts since most of these projects can be built into DarwinBuild and/or MacPorts.

cd /Volumes/PureDarwin

tar xzvf [...]MacPorts-1.7.1.tar.gz tar xzvf /Volumes/Builds/9G55/Roots/.DownloadCache/gcc.root.tar.gz tar xzvf /Volumes/Builds/9G55/Roots/.DownloadCache/gcc_42.root.tar.gz tar xzvf /Volumes/Builds/9G55/Roots/.DownloadCache/gcc_os.root.tar.gz tar xzvf /Volumes/Builds/9G55/Roots/.DownloadCache/gcc_select.root.tar.gz (optional?) tar xzvf /Volumes/Builds/9G55/Roots/.DownloadCache/gccfast.root.tar.gz    tar xzvf /Volumes/Builds/9G55/Roots/.DownloadCache/Libc_headers.root.tar.gz tar xzvf /Volumes/Builds/9G55/Roots/.DownloadCache/tcsh.root.tar.gz (needed?) tar xzvf /Volumes/Builds/9G55/Roots/.DownloadCache/OpenSSL.root.tar.gz

tar xzvf /Volumes/Builds/9G55/Roots/.DownloadCache/SQLite.root.tar.gz 

tar xzvf /Volumes/Builds/9G55/Packages/curl.root.tar.gz  tar xzvf /Volumes/Builds/9G55/Packages/gnumake.root.tar.gz            

tar xjvf /opt/local/var/macports/packages/darwin/i386/tcl-8.5.6_0+threads.i386.tbz2 bzip2.root.tar.bz2

These steps (tar tar tar...) can be replaced by a proper `pd_roots' (soon available) file at setup, and a minimal amount of tar:

cd /Volumes/PureDarwin

tar xzvf [...]/MacPorts-1.7.1.tar.gz

tar xjvf /opt/local/var/macports/packages/darwin/i386/tcl-8.5.6_0+threads.i386.tbz2 bzip2.root.tar.bz2

Then

chroot .

Since the tcl project (idem for X11) cannot be built right now in DarwinBuild, we're using one built from MacPorts. We alterate in consequences some configure flags and vars (e.g., TCLSH), because dtrace' told to us when configure' hits tclsh test:   1  18023                       stat:entry sh /bin/tclsh   1  18023                       stat:entry sh /sbin/tclsh   1  18023                       stat:entry sh /usr/bin/tclsh   1  18023                       stat:entry sh /usr/sbin/tclsh   1  18023                       stat:entry sh /usr/local/bin/tclsh   1  18023                       stat:entry sh /usr/local/sbin/tclsh   1  18023                       stat:entry sh /usr/libexec/tclsh   1  18023                       stat:entry sh /System/Library/CoreServices/tclsh

Also, after a quick look in the `configure' file: ac_cv_path_TCLSH="$TCLSH" # Let the user override the test with a path. Exactly what we need, in fact! 

Without X11:

TCLSH=/opt/local/bin/tclsh ./configure --without-objc-foundation --without-objc-runtime  --without-x  --with-tcl=/opt/local/lib --with-tclinclude=/opt/local/include --with-included-tclthread

With X11 from MacPorts:

tar xjvf /opt/local/var/macports/packages/darwin/i386/xorg-libX11-1.1.5_1+x11_xcb.i386.tbz2 TCLSH=/opt/local/bin/tclsh ./configure --without-objc-foundation --without-objc-runtime --with-x --x-includes=/usr/X11R6/include/ --x-libraries=/usr/X11R6/lib/ --with-tcl=/opt/local/lib --with-tclinclude=/opt/local/include --with-included-tclthread

Then simply:

make make install [...]

Congratulations, you have successfully installed the MacPorts system. To get the Portfiles and update the system, run:

sudo port -v selfupdate

Please read "man port", the MacPorts guide at http://guide.macports.org/ and Wiki at http://trac.macports.org/ for full documentation.

Stray sources might have been left in the legacy /opt/local/var/db/dports directory after this upgrade, which moved most of what it could to /opt/local/var/macports, so you might want to look in the former and cleanup manually.

Problem: checking for Tcl configuration... configure: error: Can't find Tcl configuration definitions

Solution: darwinbuild tcl && darwinbuild -load tcl (it fails to build at this time (carbon headers missing)) or alternatively, use some binary roots from MacPorts:

cd BuildRoot tar xjvf /opt/local/var/macports/packages/darwin/i386/tcl-8.5.4_0+threads.i386.tbz2 chroot .

ln -s /opt/local/bin/tclsh8.5 /usr/bin/    ln -s /opt/local/bin/tclsh8.5 /usr/bin/tclsh

Be sure to precise the alternative path in case you MacPorts: ./configure --with-tcl=/opt/local/lib --with-tclinclude=/opt/local/include

Problem: configure: error: cannot find curl-config. Is libcurl installed? Solution: darwinbuild curl && darwinbuild -load curl

Then we can run `make' but it fails on:

gcc -pipe -DPACKAGE_NAME="thread" -DPACKAGE_TARNAME="thread" -DPACKAGE_VERSION="2.6" -DPACKAGE_STRING="thread 2.6" -DPACKAGE_BUGREPORT="" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DNO_VALUES_H=1 -DHAVE_LIMITS_H=1 -DHAVE_SYS_PARAM_H=1 -DUSE_THREAD_ALLOC=1 -D_REENTRANT=1 -D_THREAD_SAFE=1 -DHAVE_PTHREAD_ATTR_SETSTACKSIZE=1 -DHAVE_READDIR_R=1 -DTCL_THREADS=1 -DTCL_WIDE_INT_TYPE=long long -DHAVE_STRUCT_STAT64=1 -DUSE_TCL_STUBS=1   -I"/opt/local/include"    -I/opt/local/include -Os -Wall -Wno-implicit-int -fno-common -c echo ./generic/threadPoolCmd.c -o threadPoolCmd.o In file included from /usr/include/sys/time.h:77,                  from ./generic/threadPoolCmd.c:1707: /usr/include/sys/_structs.h: In function 'GetTime': /usr/include/sys/_structs.h:192: error: nested functions are disabled, use -fnested-functions to re-enable /usr/include/sys/_structs.h:192: error: invalid storage class for function '__darwin_fd_isset' make[2]: *** [threadPoolCmd.o] Error 1

Without tclthread seems to make a difference: ./configure --with-tcl=/opt/local/lib --with-tclinclude=/opt/local/include -without-included-tclthread But the classic missing foundation header appears:

tclobjc.m:42:35: error: Foundation/Foundation.h: No such file or directory

So, let's try with Foundation replacement from GNUstep compiled through MacPorts:

cd BuildRoot tar xjvf /opt/local/var/macports/packages/darwin/i386/gnustep-base-1.14.0_0+ffi.i386.tbz2 GNUSTEP_SYSTEM_ROOT=/opt/local/GNUstep/System ./configure --with-tcl=/opt/local/lib --with-tclinclude=/opt/local/include -without-included-tclthread It fails on:

On the MacPorts website, there is a pkg that contains MacPorts for the Mac. In this section, we are trying to use this pkg to install MacPorts on PureDarwin. For a PureDarwin 9 system, we need to download the MacPorts version for Leopard. Next, we need to delete the file MacPorts-1.8.2.pkg/Contents/Resources/InstallationCheck, otherwise we just get "Error - This package is meant to be installed on Mac OS X 10.5.". Next, we can install the package into our PureDarwin system: 

installer -pkg MacPorts-1.8.2.pkg -target /Volumes/PureDarwin/

Now we chroot into the PureDarwin system and try to run the "port" command:

sh-3.2# port /opt/local/bin/port: line 4: /usr/bin/tclsh: No such file or directory /opt/local/bin/port: line 4: exec: /usr/bin/tclsh: cannot execute: No such file or directory

Hence we need to symlink tclsh from /opt/local/bin:

sh-3.2# ln -s /opt/local/bin/tclsh /usr/bin/

Now the port command almost runs, but for some strange reason the con files are missing, so we need to do

cp /opt/local/etc/macports/macports.conf.default /opt/local/etc/macports/macports.conf cp /opt/local/etc/macports/sources.conf.default /opt/local/etc/macports/sources.conf cp /opt/local/etc/macports/variants.conf.default /opt/local/etc/macports/variants.conf

**Important: **Now we need to configure MacPorts as described on the MacPorts page.

At this point, the port command should be launchable and working.

http://www.macports.org/ 

http://svn.macosforge.org/repository/macports/branches/