https://iperf.fr/iperf-doc.php

default

• iperf3 -s
• iperf3 -c

UDP Tests

```
# Client Node setup
# -c tells the client what server to connect to on the far side
# -n will send 100Gigabytes of data
# -R instead of client sending traffic, this reverses the flow so the server sends and client receives
# -u send the traffic over UDP
# -b Max bandwidth set at 500Mbps
```

• iperf3 -c 169.254.141.36 -n 100G -R -u -b 500M

  # One node needs to be set as the server
  # -B (binds) or listens on the IP address given
  # -s tells iperf3 to start up a server
  

• iperf3 -B 169.254.141.36 -s