Setting up the Lab - griffinsnest/tech-Jorunal-1 GitHub Wiki

How to set up this lab

---

To be honest, this lab was entirely just a culmination of many of the previous labs' subject matter that we learned. Meaning that there wasn't anything new to kinda go over here. The first deliverable of the subnet table is just another example of calculating the subnets of a network as we did in lab 6.2, which you can read how we do that over here. Then the actual physical setup of the computers, switches, and routers, both placing them and addressing them with the correct addresses, are again just repeating what we've done in several labs previously. In the case of setting up the routers as the default gateway and the serial network between the two for the communication between them, look here. Finally for allowing proper communication between the two collections of subnets, simply refer back to the previous lab of 10.1 on how to set up RIP version 2 on the networks to advertise themselves and allow communication with each other over at this tech journal.