Static Route Instruction - giangpham-cncs/Capstone GitHub Wiki

Sprint 2 - Static Route

Given networks:

• Router 1: 192.168.10.0/24
• Router 2: 192.168.20.0/24
• Router 3: 192.168.30.0/24
• R1 to R2: 10.10.10.0/24
• R1 to R3: 10.10.20.0/24

Router IP configuration

• Router>en
• Router#config t
• Router(config)#int s0/0 or int f0/0
• Router(config-if)#ip add 192.x.x.x 255.x.x.x
• no shut and exit

VPC IP configuration

• PC> ip 192.x.x.x 255.x.x.x 192.x.x.x

On Router 1

• Router(config)# ip route 192.168.20.0 255.255.255.0 10.10.10.55
• Router(config)# ip route 192.168.30.0 255.255.255.0 10.10.20.55

On Router 2

• Router(config)# ip route 192.168.10.0 255.255.255.0 10.10.10.5
• Router(config)# ip route 192.168.30.0 255.255.255.0 10.10.10.5

On Router 3

• Router(config)# ip route 192.168.10.0 255.255.255.0 10.10.20.5
• Router(config)# ip route 192.168.20.0 255.255.255.0 10.10.20.5

---

Task 2: Add a new network (192.168.40.0/24)

• Add Router 4 and connect to Router 3
• Add Switch 4 and connect to Router 4
• Add PC7 and PC8, then connect them to Switch 4
• Assign an IP address and subnet to Router 4
• Assign IP address, subnet, and gateway to PC7, PC8
• Configure a static route on Router 4, make sure PC7 and PC8 can ping other PCs