Macros_en_old - ghzserg/zmod GitHub Wiki

ZMOD Macros List

A macro is a small program written in Klipper/Gcode.

It can be called from:

A GCODE file
The Fluidd/Mainsail console (press the C key in Fluidd).

Default values are shown in parentheses.

Main

LANG

Set the language for zmod to work in.

LANG - language, en - English, ru - Russian, de - German, fr - French, it - Italian, es - Spanish, zh - Chinese, ja - Japanese, ko - Korean (en)

Example:

LANG LANG=en

START_PRINT

Replaces the native start G-code (if using the screen, add M140/M190 for bed temp and M109/M104 for extruder temp).

EXTRUDER_TEMP: Extruder temperature (245).
BED_TEMP: Bed temperature (80).
MESH: Name of the bed mesh to load. If empty, no mesh is loaded. If it doesn’t exist, a new mesh will be created ("").
FORCE_LEVELING: Force bed leveling (False).
SKIP_LEVELING: Skip bed leveling under any conditions. Overrides FORCE_KAMP and FORCE_LEVELING (False).
FORCE_KAMP: Build an adaptive bed mesh (False). Recommended to also set SAVE_ZMOD_DATA CLEAR=LINE_PURGE to use the purge area for mesh calibration.
Z_OFFSET: Set Z offset (0.0).
SKIP_ZOFFSET: For native screen printing, do not set Z offset (True for native screen / False for headless mode).
INTERNAL: For Pro versions in headless mode: 0 = external airflow, 1 = internal recirculation (1).

Notes:

Any calibration (FORCE_KAMP or FORCE_LEVELING) triggers CLEAR_NOZZLE.
During START_PRINT, ZSSH_RELOAD restores SSH connections if needed.

Example for Orca with native screen: Replace the start G-code with:

START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]
M190 S[bed_temperature_initial_layer_single]
M104 S[nozzle_temperature_initial_layer]

Example for Orca in headless mode:

START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]

To display layer count correctly in Fluidd, add to the start G-code:

SET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]

And add to the layer change G-code:

SET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}

Bed leveling options

Global Flags (set via SAVE_ZMOD_DATA):

PRECLEAR: Enable nozzle pre-cleaning in CLEAR_NOZZLE (0 = off, 1 = on).
CLEAR: Nozzle purge method (LINE_PURGE).
PRINT_LEVELING: Always build a bed mesh before printing (0 = off, 1 = on).
USE_KAMP: Use adaptive mesh (KAMP) instead of full mesh (0 = off, 1 = on).
DISABLE_PRIMING: Disable priming extrusion (0 = off, 1 = on).
FORCE_MD5: Verify file MD5 checksums (1 = enabled by default).
DISABLE_SKEW_CORRECT: Disable skew correction (1 = disabled).
AUTO_REBOOT: Auto-reboot after print (0 = off, 1 = reboot, 2 = firmware restart).
CLOSE_DIALOGS: Auto-close dialogs post-print (0 = off, 1 = slow, 2 = fast).
STOP_MOTOR: Disable motors 25 seconds after print (1 = on).
MIDI_START/END: Play MIDI files at print start/end ("").

END_PRINT

Replaces the native end G-code.

Global Flags (set via SAVE_ZMOD_DATA):

AUTO_REBOOT: Auto-reboot after print (0 = off, 1 = reboot, 2 = firmware restart).
CLOSE_DIALOGS: Auto-close dialogs post-print (0 = off, 1 = slow, 2 = fast).
STOP_MOTOR: Disable motors 25 seconds after print (1 = on).
MIDI_END: Play MIDI at print end ("").

KAMP

Adaptive bed leveling with nozzle cleaning.

EXTRUDER_TEMP: Extruder temperature (240).
BED_TEMP: Bed temperature (80).

Recommended: Use START_PRINT with SAVE_ZMOD_DATA PRINT_LEVELING=1 USE_KAMP=1.

AUTO_FULL_BED_LEVEL

Full bed calibration with nozzle cleaning.

EXTRUDER_TEMP: Extruder temperature (230).
BED_TEMP: Bed temperature (80).
PROFILE: Mesh profile name (auto).

LEVELING_PRINT_FILE

Print a file with native screen bed leveling.

FILENAME: File to print.

Requires enabling "Local Network Only" in printer settings.

CANCEL

Abort the current print.

CLEAR_NOZZLE

Nozzle cleaning (native method).

EXTRUDER_TEMP: Extruder temperature (230).
BED_TEMP: Bed temperature (80).

Enable pre-cleaning via SAVE_ZMOD_DATA PRECLEAR=1.

LED_ON

Turn on LED lighting.

LED_OFF

Turn off LED lighting.

LED

Set LED brightness.

S: Brightness percentage (50).

PAUSE

Pause the print.

RESUME

Resume the print.

PLAY_MIDI

Play a MIDI file.

FILE: Filename (e.g., For_Elise.mid). Files are stored in mod_data/midi/.

REBOOT

Reboot the printer.

CLOSE_DIALOGS

Slowly close dialogs on the native screen (may cause freezes).

FAST_CLOSE_DIALOGS

Quickly close dialogs on the native screen. Requires enabling "Local Network Only".

NEW_SAVE_CONFIG

Save Klipper configuration without freezing the screen (experimental).

ZRESTORE

Resume print after power loss or errors. Disabled when using the native screen.

Calibrations

BED_LEVEL_SCREWS_TUNE

Bed screw adjustment using probe.

EXTRUDER_TEMP: Extruder temperature (240).
BED_TEMP: Bed temperature (80).

LOAD_CELL_TARE

Reset strain gauge weight.

PID_TUNE_BED

PID calibration for the bed.

TEMPERATURE: Target temperature (80).

PID_TUNE_EXTRUDER

PID calibration for the extruder.

TEMPERATURE: Target temperature (245).
COOLER: Fan speed (255).

ZSHAPER

Input shaper calibration. Graphs are saved in mod_data/.

BELTS_SHAPER_CALIBRATION

Belt resonance analysis.

SPECTROGRAM: Generate spectrogram (1 = enabled).

NOZZLE_CONTROL

Doesn't work on AD5X

Detects part detachment or nozzle collision with the bed.

Emergency printer shutdown if weight limit is exceeded.

WEIGHT - weight in grams (1500)

Settings persist after reboot.

Set NOZZLE_CONTROL WEIGHT=0 to disable this feature.

Control is disabled until the first macro call.

When using the stock screen, executing the macro reboots the printer.

When operating without the stock screen, it restarts Klipper since configuration files are modified.

Everything works automatically, but the following macros are also available for use in Gcode:

ZCONTROL_ON - activate monitoring
ZCONTROL_OFF - deactivate monitoring
ZCONTROL_STATUS - check function status
ZCONTROL_PAUSE - trigger pause on detection (pause executes only after command queue clears; avoid enabling on first layers)
ZCONTROL_ABORT - trigger KLIPPER shutdown on detection

To enable nozzle monitoring on first layers, add ZCONTROL_PAUSE via the slicer at the layer where pause should replace abort.

Layer Pause

SET_PAUSE_NEXT_LAYER

Pause/trigger macro on the next layer.

ENABLE: 0 = off, 1 = on (1).
MACRO: Macro to execute (PAUSE).

SET_PAUSE_AT_LAYER

Pause/trigger macro at a specific layer.

ENABLE: 0 = off, 1 = on (1).
MACRO: Macro to execute (PAUSE).
LAYER: Layer number (0).

Filament

COLDPULL

Cold pull nozzle cleaning. Follow on-screen instructions.

M600

Filament change.

COLOR

AD5X only: Filament type/color management (native screen required).

System

CAMERA_ON

Enable alternate camera.

WIDTH: Resolution width (640).
HEIGHT: Resolution height (480).
FPS: Framerate (20).
VIDEO: Camera device (video0).
FS: Fix frame size for unstable cameras (0 = off).

CAMERA_OFF

Disable alternate camera.

CAMERA_RESTART

Restart alternate camera.

GET_ZMOD_DATA

View current ZMOD parameters.

SAVE_ZMOD_DATA

Save global ZMOD parameters (persistent after reboots).

Usage:

SAVE_ZMOD_DATA PARAMETER=value

Example:

SAVE_ZMOD_DATA CLOSE_DIALOGS=2

Parameters Used During Print Start and Bed Leveling [START_PRINT]

MIDI_START

Play MIDI at print start (""). Use 0 to disable. Example: SAVE_ZMOD_DATA MIDI_START=Pain-Shut-your-mouth.mid

PRECLEAR

Enable nozzle pre-cleaning in CLEAR_NOZZLE.

0 = Disabled (default)
1 = Enabled Example: SAVE_ZMOD_DATA PRECLEAR=0

PRINT_LEVELING

Always build a bed mesh before printing (using the native screen if enabled).

0 = Disabled (default)
1 = Enabled *To use native screen bed leveling, enable "Local Network Only" in printer settings: Settings → WiFi icon → Network Mode → Toggle "Local Network Only.* **Example:** SAVE_ZMOD_DATA PRINT_LEVELING=1`

USE_KAMP

Use adaptive bed mesh (KAMP) instead of full mesh where possible.

0 = Disabled (default)
1 = Enabled Recommended to set SAVE_ZMOD_DATA CLEAR=LINE_PURGE to use the purge area for mesh calibration. Example: SAVE_ZMOD_DATA USE_KAMP=1

MESH_TEST

Test bed mesh before printing.

0 = Disabled
1 = Enabled (default) Probes the bed to verify the loaded mesh matches the physical setup. Triggers a warning if deviations exceed ±0.21mm. Example: SAVE_ZMOD_DATA MESH_TEST=0

FORCE_MD5

Validate file integrity using MD5 checksums. Corrupted files are deleted.

0 = Disabled
1 = Enabled (default) Add addMD5.bat (Windows) or addMD5.sh (Linux) to post-processing scripts in your slicer. Example: SAVE_ZMOD_DATA FORCE_MD5=1

DISABLE_SKEW_CORRECT

Disable skew correction.

0 = Load skew_profile (default)
1 = Disabled Learn more Example: SAVE_ZMOD_DATA DISABLE_SKEW_CORRECT=1

LOAD_ZOFFSET

Load saved Z-offset from SET_GCODE_OFFSET.

0 = Disabled
1 = Enabled (default) How Z-offset works Example: SAVE_ZMOD_DATA LOAD_ZOFFSET=0

DISABLE_PRIMING

Disable nozzle priming extrusion.

0 = Enabled (default)
1 = Disabled Example: SAVE_ZMOD_DATA DISABLE_PRIMING=0

CLEAR

Select nozzle purge method:

_CLEAR1: Orca-style (may scratch bed with KAMP)
_CLEAR2: FF group variant 1 (may scratch bed)
_CLEAR3: FF group variant 2 (may scratch bed)
_CLEAR4: Top-right to bottom-left wipe
_CLEAR_TRAP: Brush-assisted wipe (top-right)
LINE_PURGE: KAMP purge (default) Custom purge macros can be added to mod_data/user.cfg. Example: SAVE_ZMOD_DATA CLEAR=LINE_PURGE

Parameters Used During Print End/Cancel [END_PRINT]

MIDI_END

Play MIDI at print end (""). Use 0 to disable. Example: SAVE_ZMOD_DATA MIDI_END=Pain-Shut-your-mouth.mid

CLOSE_DIALOGS

Auto-close print completion dialogs.

0 = Disabled (default)
1 = Slow close
2 = Fast close Enable "Local Network Only" for fast closing. Example: SAVE_ZMOD_DATA CLOSE_DIALOGS=2

STOP_MOTOR

Disable motors 25 seconds after print/cancel.

0 = Disabled
1 = Enabled (default) Example: SAVE_ZMOD_DATA STOP_MOTOR=1

AUTO_REBOOT

Auto-reboot after print:

0 = Disabled (default)
1 = Full reboot (REBOOT)
2 = Firmware restart (FIRMWARE_RESTART for headless mode) Example: SAVE_ZMOD_DATA AUTO_REBOOT=0

System-Wide Parameters

MOTION_SENSOR

Use filament motion sensor instead of filament runout sensor.

0 = Disabled (default)
1 = Enabled Disable native filament sensor on the screen. Example: SAVE_ZMOD_DATA MOTION_SENSOR=1

FIX_SCV

Correct square_corner_velocity in shaper graphs.

0 = Stock value (5, default)
1 = Use value from mod_data/user.cfg Recommended: Add square_corner_velocity: 9 to mod_data/user.cfg for better print quality. Example: SAVE_ZMOD_DATA FIX_SCV=1

FIX_E0011

This is an experimental parameter

Global causes of E0011 error:

Host did not respond within allotted time (0.025 sec)
MCU did not respond within allotted time (0.025 sec)

Specific causes:

Frozen Nations MCU mainboard or eboard (Lost communication with MCU 'mcu'). Fix: Reboot. Replace mainboard (mcu) or extruder board (eboard).
Host processor overload (shaper calculations/graph generation).
EMMC overload (git operations, backups, large file uploads during printing).
Insufficient RAM. Fix: Re-solder CPU and upgrade RAM to 256 MB.
Damaged extruder cable. Fix: Replace/adjust cable.
Extruder head board connector issues. Fix: Replace extruder board.
SWAP data loading (SWAP on EMMC with 10 MB/s speed; SWAP usage during shaper generation reaches 25 MB). Fix: Disable SWAP if using 256 MB RAM: SAVE_ZMOD_DATA USE_SWAP=0.
MCU firmware failure. Fix: Reflash MCU via factory reset or use mod UPDATE_MCU.

Fix E0011 and Communication timeout during homing: Printer reboots when changing parameter. 0=No, 1=Yes (default: 0)

0 keeps stock value: 0.025
1 sets value to: 0.05

Example: SAVE_ZMOD_DATA FIX_E0011=1

About Communication timeout during homing: Occurs due to high latency between host and MCUs. Round-trip time should consistently stay below 10 ms. Short latency spikes can cause homing failures.

TRSYNC_TIMEOUT (Klipper parameter):

Stock value: 0.025 sec (file: /opt/klipper/klippy/mcu.py)
Patched value: 0.05 sec

Stock firmware fix:

Format USB as FAT32.
Save to USB flash:
- Fix parameter
- Restore stock parameter
Power off printer.
Insert USB into printer.
Power on printer (loud beeping will occur).
Wait for reboot.
Remove USB.
Reprint problematic file — E0011 should resolve.

Manual stock firmware fix:

Install root.
Connect via WinSCP over SSH.
Edit /opt/klipper/klippy/mcu.py.
Find line: TRSYNC_TIMEOUT = 0.025.
Replace with: TRSYNC_TIMEOUT = 0.05.
Save file.
Reboot printer.

FIX_E0017

Fix E0017 error - printer will reboot when changing parameter. 0=No, 1=Yes (1)

In file /opt/klipper/klippy/toolhead.py: Stock parameter LOOKAHEAD_FLUSH_TIME = 0.5, original Klipper uses LOOKAHEAD_FLUSH_TIME = 0.250. Our modification works well with LOOKAHEAD_FLUSH_TIME = 0.150

0 sets parameter to stock value
1 sets parameter to 0.150

Example: SAVE_ZMOD_DATA FIX_E0017=1

Stock firmware fix:

Format USB as FAT32
Save to USB flash:
- Adventurer5M-e0017-4.tgz for FlashForge 5M
- Adventurer5MPro-e0017-4.tgz for FlashForge 5M Pro
Power off printer
Insert USB into printer
Power on printer
Printer will beep loudly
Wait for automatic reboot
Remove USB flash
Reprint problematic file - E0017 error should be resolved

Manual stock firmware fix:

Install root
Connect via WinSCP over SSH
Edit file /opt/klipper/klippy/toolhead.py
Find line: LOOKAHEAD_FLUSH_TIME = 0.5
Replace with: LOOKAHEAD_FLUSH_TIME = 0.150
Save file to printer
Reboot printer

LED

LED brightness at startup (50%). Example: SAVE_ZMOD_DATA LED=50

MIDI_ON

Play MIDI at printer startup (""). Use 0 to disable. Example: SAVE_ZMOD_DATA MIDI_ON=Pain-Shut-your-mouth.mid

NEW_SAVE_CONFIG

Use non-freezing SAVE_CONFIG for PID calibration.

0 = Disabled (default)
1 = Enabled Example: SAVE_ZMOD_DATA NEW_SAVE_CONFIG=0

USE_SWAP

Enable swap memory:

0 = Disabled (requires 256MB RAM)
1 = Use EMMC (default)
2 = Prefer USB flash Example: SAVE_ZMOD_DATA USE_SWAP=1

CHINA_CLOUD

Enable Chinese cloud services: 0=No, 1=Yes (default: 0)

Example: SAVE_ZMOD_DATA CHINA_CLOUD=0

Disabling Chinese clouds (recommended)

Important: Even if all cloud-related options are disabled via the printer interface, the device may still attempt to send photos, videos, and telemetry to Chinese servers. Setting this parameter to 0 partially blocks these manufacturer-background activities.

⚠️ WARNING: Disabling Chinese clouds stops automatic firmware updates. To update stock firmware:

Re-enable cloud services: SAVE_ZMOD_DATA CHINA_CLOUD=1
Reboot the printer
Perform firmware update

Stock firmware configuration

To disable Chinese clouds:

Format USB drive as FAT32
Download file: flashforge_init.sh (disable cloud)
Copy the file to the USB drive
Power off the printer
Insert USB into the printer
Power on the printer
Wait for 1 reboot cycle
Remove USB drive

To enable Chinese clouds:

Format USB drive as FAT32
Download file: flashforge_init.sh (enable cloud)
Copy the file to the USB drive
Follow steps 4-8 above

NICE

Set Klipper process priority (1-40, higher = more resources). Default: 20. Example: SAVE_ZMOD_DATA NICE=20

DISPLAY_OFF_TIMEOUT

Native screen timeout in headless mode (seconds). Default: 180. Example: SAVE_ZMOD_DATA DISPLAY_OFF_TIMEOUT=120

PRO_POWEROFF_TIMEOUT

Auto-poweroff timer for FF5M Pro (minutes). 0 = Disabled. Example: SAVE_ZMOD_DATA PRO_POWEROFF_TIMEOUT=10

SAVE_MOONRAKER

Custom macro button layouts:

0 = Use ZMOD defaults (default)
1 = Allow user-defined layouts Example: SAVE_ZMOD_DATA SAVE_MOONRAKER=1

SHUTDOWN

Power off the printer.

REMOVE_ZMOD

Remove zmod.

FULL: 0 – keep the /opt/config/mod_data folder, 1 – delete the /opt/config/mod_data folder (0)

The /opt/config/mod_data folder stores configurations for zmod, fluidd, moonraker, and mainsail.

By default, it is not deleted because users often accidentally run the REMOVE_ZMOD macro.

SKIP_ZMOD

Reboot into the original system without launching zmod.

Disables configuration files for ZMOD, Moonraker, and Fluidd.

The following remain active:

Alternative camera
SSH

DISPLAY_ON

Enable native screen.

DISPLAY_OFF

Disable native screen (saves RAM).

MEM

Show memory usage.

TEST_EMMC

Test EMMC/USB/SWAP performance.

CLEAR_EMMC

Clear logs/GCODE.

DATE_GET

Show current time.

DATE_SET

Set system time.

WEB

Switch between Fluidd and Mainsail.

SET_TIMEZONE

Configure timezone.

TAR_CONFIG

Backup logs and configs.

RESTORE_TAR_CONFIG

Restores configuration files from the config.tar archive

The archive must be loaded in 'Configuration' -> 'mod_data' -> config.tar

ZFLASH

Update ZMOD via USB.

STOP_ZMOD

Stop Moonraker/Fluidd.

START_ZMOD

Start Moonraker/Fluidd.

CHECK_MD5

Validate file checksums.

UPDATE_MCU

Update MCU firmware.

CHECK_SYSTEM

Verify OS file integrity.

ZSSH_ON

Enable SSH server.

SSH_SERVER: SSH server IP.
SSH_PORT: SSH port.
SSH_USER: SSH username.
VIDEO_PORT: Camera port.
MOON_PORT: Moonraker port.

ZSSH_OFF

Disable SSH server.

ZSSH_RESTART

Restart SSH server.

ZSSH_RELOAD

Reload SSH configuration.

SSH Keys

Add your SSH public key to authorized_keys on the printer.

Start ZSSH

Run ZSSH_ON on the printer.

SHUTDOWN

Power off the printer.

REMOVE_ZMOD

Uninstall ZMOD.

FULL=0: Keep /opt/config/mod_data (default).
FULL=1: Delete all configs.

SKIP_ZMOD

Reboot into stock firmware (disables ZMOD services).

DISPLAY_ON

Enable native screen and reboot.

DISPLAY_OFF

Disable native screen to save RAM.

GUPPY=0: Disable GuppyScreen.
GUPPY=1: Enable GuppyScreen (default).

MEM

Show memory usage.

TEST_EMMC

Test storage performance.

SIZE: Data size in MB (100).
SYNC: Sync mode (1 = enabled).
FLASH: Test target (0=EMMC, 1=USB, 2=RAM).
RANDOM: Use random data (0=off).

CLEAR_EMMC

Clear logs/files.

LOG=1: Clear logs (default).
ANY=1: Clear all non-log files.

DATE_GET

Show current time.

DATE_SET

Set system time (format: YYYY.MM.DD-HH:MM:SS). Example: DATE_SET DT=2024.01.01-00:00:00

WEB

Switch between Fluidd and Mainsail.

SET_TIMEZONE

Set timezone. Example: SET_TIMEZONE ZONE=Asia/Yekaterinburg

TAR_CONFIG

Backup configs to mod_data/config.tar.

ZFLASH

Update ZMOD via USB.

STOP_ZMOD

Stop Moonraker/Fluidd services.

START_ZMOD

Restart Moonraker/Fluidd.

CHECK_MD5

Validate G-code MD5 checksums.

DELETE=yes: Delete corrupted files.

UPDATE_MCU

Experimental - Update MCU firmware (Klipper v12).

CHECK_SYSTEM

Verify OS file integrity.

RESTORE=1: Auto-repair files.

ZSSH_ON

Enable SSH tunneling to remote server.

SSH_SERVER: Server IP/hostname.
SSH_PORT: SSH port (22).
SSH_USER: Remote username.
VIDEO_PORT: Camera port (8080).
MOON_PORT: Moonraker port (7125).
REMOTE_RUN: Command to execute on server (e.g., ./ff5m.sh bot1).

ZSSH_OFF

Disable SSH tunneling.

ZSSH_RESTART

Restart SSH tunnel.

ZSSH_RELOAD

Reload SSH config (called automatically during prints).

Telegram Bot

Description

Due to the printer's limited hardware resources (slow CPU and low RAM), running moonraker-telegram-bot directly on the printer is impractical. Instead, the bot is deployed on an external server.

Requirements:

A server (physical/virtual) accessible via SSH from the printer.

Automatic SSH Key Generation: ZMOD automatically creates SSH keys for passwordless authentication:

Public key: /mod_data/ssh.pub.txt → Add to server's ~/.ssh/authorized_keys.
Private key: /mod_data/ssh.key → Used by the printer for SSH connections.

Setup via Macro: Use the ZSSH_ON macro with these parameters:

SSH_SERVER: Server IP/hostname.
SSH_PORT: SSH port (usually 22).
SSH_USER: Server username.
VIDEO_PORT: Camera stream port (default: 8080).
MOON_PORT: Moonraker API port (default: 7125).
REMOTE_RUN: Command to execute on the server (e.g., ./ff5m.sh bot1).

Note: SSH consumes ~300KB of memory. If the printer and server are on the same LAN, SSH tunneling is optional. Configure directly via telegram.conf (located in mod/telegram/ on the printer).

Bot Registration

Visit @BotFather on Telegram.
Send /newbot.
Choose a display name (e.g., "My Printer Bot").
Choose a bot username ending with _bot (e.g., ff5msuper_bot).
Copy the provided bot_token for server configuration.

Server Deployment

One-Command Install (Debian)

Run as root:

bash <(wget --cache=off -qO- https://github.com/ghzserg/zmod_ff5m/raw/1.5/telegram/telegram.sh)

Script Actions:

Installs Docker.
Downloads docker-compose.yml and telegram.conf
Creates tbot user.
Guides through bot setup (requires bot_token and chat_id).
Installs ff5m.sh.

Manually add the SSH public key from mod_data/ssh.pub.txt to the server.

Manual Setup

Install Docker:

apt update && apt install docker.io docker-compose apparmor -y

Create bot directory:
```
mkdir bot1 && cd bot1
```
Add docker-compose.yml and telegram.conf.
Configure telegram.conf with your bot_token and chat_id.
Start the bot:
```
docker-compose up -d
```

Create a dedicated user:

useradd tbot && usermod -aG docker tbot

SSH Key Configuration

Switch to tbot user:
```
su - tbot
```

Add public key:

mkdir -p .ssh
echo "PASTE_PUBLIC_KEY_HERE" > .ssh/authorized_keys

Printer Configuration

Run the ZSSH_ON macro on the printer with your server details. SSH tunnels automatically restart 3 minutes after reboots.

Example:

ZSSH_ON SSH_SERVER=192.168.1.100 SSH_USER=tbot VIDEO_PORT=8080 MOON_PORT=7125 REMOTE_RUN="./ff5m.sh bot1"