E-Linter Logger - Node red flows in Home Assistant and cards for pulling solar stats from their logger platform

Initially designed for the new SunSynk Logger

This is something I have been working on for a while based on my own work with some information gathered from others on Power Forum and probing what is available. I have spent the last few days cleaning things up so that they can be easily imported into new environments

There are 2 node red flows and a set of templates provided. Most plant/inverter information is available as a few main sensors with a lot of attributes on each. Files etc are available on Githib Repository for the E-Linter Logger - SunSynk

I have a seperate set of flows for updating the Sunsynk Settings to cater for load shedding in South Africa I have mainly been using those to ensure I always have battery soc available etc with the huge load shedding we have. THESE ARE NOT NOOB FRIENDLY AND ARE MEANT FOR REFERENCE ONLY

The current SunSynk Dongle is currently rebranded from e-linter.com. http://e-linter.com/smart-energy/magpie

Region 1 vs Regions 2

Sunsynk is busy implementing a new region in the UK which is called Region 2. There is a slightly different login mechanism so the flows have to be seperated

Region 1

The quickest way to check would be to try login to https://pv.inteless.com/ and see if you can login to there. It may be you are actually using a rebranded dongle. If so then this set of flows should get your invertor stats.

Region 2 ( THESE FLOWS HAVE NOT BEEN TESTED YET , DO NOT USE )

The quickest way to check would be to try login to https://sunsynk.net/ select region 2 and see if you can login to there.