A Model (and ModelInstance) can contain one or more animations. An animation is a sequence (keyframes) of transformations which are applied to one or more nodes of the model. Each animation is identified by it's name (id), which must be unique within the model. E.g. you might have character with an animation called "walk" and "attack". This page describes how to load and use animations within your application.

Skinning can be used to deform the model (mesh) based on the transformation of one or more nodes. This is commonly used conjunction with animations. The page also describes how to use skinning within your application.

Loading animations

When using fbx-conv to convert your model from FBX to G3DB/G3DJ, animations are automatically converted along with it. Just like FBX, G3DB/G3DJ files can contain multiple animations in a single file along with the other model data. Animations applied to nodes which are not present in the source FBX file, will not be converted. So make sure to select all the nodes and animations when exporting to FBX.

You can check the converted animations by converting to the G3DJ file format and opening the resulting file in your favorite text editor. The animations are located at the bottom of the file. Be aware that animations (keyframes) can bloat the file, so it's advised to use the smaller G3DB file format on production.

LibGDX does not support custom interpolation between keyframes. If you use an interpolation other than linear, fbx-conv will generate additional keyframes to compensate this. This compensation is done according to the target FPS. While the target FPS is customizable in FBX, not all modeling applications allow you to change this value (the default is 30 FPS). To avoid bloating the file with additional keyframes, make sure to use linear interpolation whenever possible.

When you load the G3DB/G3DJ file in your application using G3dModelLoader or AssetManager, the animations are also loaded. When you create a ModelInstance from the Model, the Animations are also copied to the ModelInstance. If you specify specific nodes while creating the ModelInstance, only the animations that are applied to those nodes (and child nodes) are copied to the new ModelInstance.

Using animations

Applying a single animation

To apply an animation to a ModelInstance, you can create an AnimationController. An AnimationController is dedicated to a single ModelInstance and the ModelInstance must outlive the AnimationController. The AnimationController can be used to apply a single animation to the ModelInstance at a time, although it support blending (=transitioning) between multiple animations. If you want to apply multiple animations to the same ModelInstance, you can use multiple AnimationControllers, as long as they don't interfere with each other (don't affect the same nodes).

When an animation is set (described below), the AnimationController needs to be updated every frame. This can be done using the AnimationController.update(float delta) method. The delta argument is used to inform the AnimationController how much time is past since the last call to update. Most commonly Gdx.graphics.getDeltaTime() is used for that parameter.

To set the current animation, use the setAnimation(String id) method. This will cause the animation to be played immediately (removing the current animation, if any). The id argument must be the name (case sensitive) of an existing animation within the ModelInstance.

ModelInstance instance;
AnimationController controller;
public void create() {
    ...
    instance = new ModelInstance(model);
    controller = new AnimationController(instance);
    controller.setAnimation("walk");
}
public void render() {
    ...
    controller.update(Gdx.graphics.getDeltaTime());
    ...
}

The setAnimation(String id) method will play the animation once at normal speed and then stop (freezing the animation at the last frame of the animation). To remove the animation (so the nodes are at their original transformation), call setAnimation(null).

Looping

If you want to execute an animation more than once, you can use the setAnimation(String id, int loopCount) method. The loopCount argument can be used to specify how many times the animation should be played (which must not be zero). To continuous loop the animation use the value -1.

AnimationDesc

Every animation method (like setAnimation(...) returns an AnimationDesc instance, which is valid while the animation is being played (or queued to be played, see below). The AnimationDesc contains all information about the animation, like the current animation time and the number of loops remaining for that animation. You can alter those values to control the animation during execution. When the animation is ended, you must remove all references to the AnimationDesc, as it might be reused (pooled) for a next animation.

AnimationListener

To get notified when an animation is looped or ended you can implement the AnimationListener interface. It will be notified when an animation is ended or looped. It receives the AnimationDesc of the animation that ended or looped. You can supply your AnimationListener with every animation method, e.g. setAnimation(String id, int loopCount, AnimationListener listener).

Blending animations

When switching animation using the setAnimation, the previous animation is stopped abruptly. It is possible to blend the previous animation into the new animation, giving a smooth transition between animations. You can use the animate(...) for that. The animate method takes the same parameters as the setAnimation method along with an additional transitionTime argument. During this time the new animation will be linear interpolated on top of the old animation, resulting in a smooth transition. If there is no previous animation, then the new animation will start immediately.

Queuing animations

To start an animation when the current animation is completed, you can use the queue(...) method. If the current animation is continuously looping, the queued animation will be executed when the current loop completed. Otherwise the queued animation will be executed when the current animation is ended (including all loops remaining). If there is no current animation, the queued animation will be executed immediately. Queued animations will be blended if a transition time greater than zero is specified.

Action animation

An action animation is a (commonly short) animation that is executed on top of the current the animation. In practice, it is the same calling animate(...) with the action animation and calling queue(...) with the previous animation.

Animation speed

Every animate method (like setAnimation, animate, queue and action) allows you to set the speed of that particular animation. The speed is defined as "seconds per second". So a value of 1 will play the animation at the normal speed. A value higher than one will play the animation faster (e.g. a value of 2 will execute the animation at twice the original speed). A value lower than one will play the animation slower (e.g. a value of 0.5 will execute the animation at half the original speed). The speed can be negative, meaning that the animation will be executed in reverse.

While you can control the speed of an individual animation, you can also control the overall speed of every animation by changing the delta value of the update(float delta) method AnimationController. E.g. if you call controller.update(0.5f * Gdx.graphics.getDeltaTime());, the overall speed will be half the original speed. The delta value can also be negative, meaning all animations are played in reverse.

Node transformations

While an animation is executed, all the affected nodes will have the isAnimated member set to true. This will cause the Node's translation, rotation and scale values not be used. So, while animating, you cannot transform the affected nodes yourself.

Skinning

Skinning is used to transform the model according to the transformation of one or more nodes (also called bones or joints). Most commonly when using skinning, invisible nodes (nodes with no NodeParts attached to them) are used to deform the model. These nodes (which commonly form a hierarchy) are also called a skeleton or armature.

So in practice, when using skinning, your model has an invisible skeleton part (one or more nodes) and a visible part (one or more nodes). While the visible nodes themselves stay untransformed, the skeleton is transformed (e.g. by animation) and therefor affect the position of the vertices of the visible mesh.

This is accomplished by using blend weights (also called bone weights) which are vertex attributes of the visible nodes. Each blend weight has an index (of the specific bone/node) and a weight (how much it is influenced by that bone/node). Each visible node (NodePart) has a reference to it's bones (nodes of the skeleton).

LibGDX only supports shader skinning, which requires at least Open GL ES 2.0. If you created your skinned model using a modeling application, exported it to FBX and converted it to G3DB/G3DJ, then skinning should seamlessly work. Just keep in mind that you need to export both the visible and invisible (skeleton) nodes along with the animations themselves.