TCPIP read mclpower - flexradio/smartsdr-api-docs GitHub Wiki

READ_MCLPOWER

Reads the power reading from an attached Mini-Circuits power meter. The power meter must be connected to the USB port on the rear of the radio. The power is sample for 1/2-second before the reading is provided so this command will consume a half-second of wall clock minimum. Providing the frequency in MHz is optional (see MCL power meter software guide for details on when or why this may be necessary).

C[D]<seq_number>|read_mclpower <frequency_MHz>

Example:

C19|read_mclpower 14

See Response Format for details on the format of the response messages from the radio

Hex Response Message Debug Output / Meaning
00000000 OK
5000008D   Power meter not successfully read or not connected

Responses

is the value in dBm read from the power meter and may be positive or negative

Response Example:

R19|0|-10.11
⚠️ **GitHub.com Fallback** ⚠️