FAQ - flashg1/evSolarCharger GitHub Wiki

Which inverter brand and charger API you are using with evSolarCharger?

To help the community, please let people know your inverter brand and charger API you got working with evSolarCharger.

Interesting discussion from PVi1 on 3 phase charger voltage

See this thread.

How to work-around limits with number of Tesla API calls?

Use Bluetooth Low Energy (BLE) device for local control of Tesla without cloud. See tesla-local-control/tesla_ble_mqtt_docker installation note. Similar suggestion from this thread. See note from pkuehnel on Bluetooth device placement. Try evSolarCharger, select "Tesla BLE MQTT API" and set "Wait status update" to 25 seconds.

evSolarCharger exits with charger not ready when using "Tesla BLE MQTT API"

Set "Wait status update" to 25 seconds if using "Tesla BLE MQTT API".

How to change Tesla Fleet API update frequency?

See vehicle sleep for polling and cost. See suggestion.

How to change Enphase update frequency?

See this.

How to adjust current if using OCPP charger?

Please read this.

What are valid values for Tesla car charge limit?

Between 50% and 100% inclusive.

Tesla 12V battery

See here.