Full Auto is here!!!

Before we start...

• Make sure that semi fisher is working perfectly for you, full auto uses semi fisher for the actual fishing part.
• Full auto works best in the first-person mode. So better change the perspective if you are using 3rd person mode.
• It's better if you keep the game in windows mode and keep the fishy GUI visible so that you can view the messages it prints in the console.

---

   

Follow the steps below to get full-auto fishy going,

1. Installing Required Addons

Once you have selected Full Auto, press Start to start the engine. Before the engine starts it will install required addons, after which it'll shut down again saying FishyQR not found. After that you can, run '/reloadui' command in the game to reload the addons.

2. Calibration

After u see the FishyQR addon, go into config (⚙ icon next to start button), and press the "Calibrate" button. This is to start the engine in calibration mode. then simply go into the game. and let the bot calibrate itself

3. Player

For the full auto to move from one hole to the next on its own, you will need a path recording. You don't have to record a path yourself. You can download and use a pre-recorded path from this forum.

Go into config (⚙ icon next to start button) select the <yourpath>.fishy file. Go near to any point in the recorded path, and then start the engine. The bot will automatically start moving around looking for holes, and fishing if it finds one. If you want to stop the bot hit the f9 key, let it finish the action the bot is doing. That's it, you can now use full-auto fisher to 24x7 AFK farm all the fishes you'll ever need.

TIP: If you just want to test a recording, to skip a hole, you can simply block and look away from the hole.

---

   

You can help make full auto fishy even better by following the steps below.

1. Recording

If you would like to record a new path, you can go into config, and change to Recording mode. Start the bot engine, then move around to record the path. Look over a fishing hole press the LMB key to record the fishing hole. You only have to record the path one way, the bot will automatically loop when you play the path. Once you are done with recording stop the bot engine. A popup will open asking if you want to overwrite, save as new or cancel the recording.

You can upload your recording on this forum so that other fishers can use it as well.

2. Edit mode

If you would like to edit an existing recording to add holes that you missed or weren't available before. Got into config and turn on "Edit" mode. Now stand near a point in the path where you want to start editing from and start the engine. The bot will move to the nearest point on the path, from there record normally as you do. After you recorded the new section, move back to a point on the original path and stop the engine. The bot will again move to the closest point on the original path. The bot will cut out the old section you recorded from and to, with the new section (as per the diagram below), the rest of the recording will still be the same.

If you had uploaded the recording before, you can update it on the forum by editing your comment and uploading the latest fishy file.

3. Bug Report

If you feel like some feature of fishy isn't working as intended or if you have a new feature idea to add in fishy you can create an issue here. Don't forget to label it fullauto and bug / feature accordingly.

---

   

Known Issues

Below are the known issues in the full auto engine, please use the given workaround until they are fixed.

• #76 When using the player, if you try to take control of the pc without turning off the bot engine as instructed, it'll feel like your mouse is moving on its own. If that happens, just press CTRL+SHIFT+ESC to open task manager, and end the python/fishy processes. That way fishy will be forced to close and it'll stop operating ur mouse/keyboard.

• #75 Don't press start multiple times as it will start multiple instances of the engine, press it once and wait for it to start.