Home - ece-uth-embedded-systems-lab/petalinux-2014.4-guide GitHub Wiki

Welcome to the petalinux-2014.4-guide wiki!

This guide will walk you through a petalinux sdk experience.

The structure of the guide is the following:

0. Home
1. Formatting the SD card
2. Petalinux Bringup

The Lab setup

The lab is based on Zedboard™ with Zynq®-7000 All Programmable SoC and specificaly on this kit.

For the guide you will need at least these components:

• A machine with a Linux distribution installed (OpenSUSE, Ubuntu etc)
• Zedboard™
• At least 4GB SD Card (included in the kit)