Manual Configuration system - easymetal/Korrostop4.0-EN GitHub Wiki

Settings of system properties.

Picture

  • 1 - Previous screen
  • 2 - The name of this device: For details, please see below
  • 3 - Data source for measured values displayed
    • Sensors: measured values are displayed
    • Simulator: Values from the simulator are displayed. Special hardware required (available from version SYS202003)
    • SD card: Sequence demo or test case is loaded from the SD card and played. (Available from version SYS202003)
  • 4 - Settings for SD card data source
    • Endless loop: Endless loop
    • Time factor: Slows down the playback compared to the data on the SD card
    • Filename: Name of the demo / test file to be played
  • 5 - Defining the E.KO IONISER
    • Autodedect: Automatic recognition (in future automatic - currently default setting 1501)
    • 1501: Manual setting overwrites Autodedect setting
    • 1502: Manual setting overwrites Autodedect setting
  • 6 - History factor: Measuring interval for mapping the history
  • 7 - Log factor: Measuring interval for saving on the SD card

Information about the device name

On delivery, the serial number (IT subject: MAC address) with the prefix KS4_ is used (by leaving this field empty).

The device name can be changed. (E.g. to the name of the EDM machine) This name is also used for accessibility via the network (IT subject: hostname). It is possible to overwrite the name for each network channel.