Build frameworks naming conventions

macports

name	what the function is about
fetch	Fetch the ${distfiles} from ${master_sites} and place it in ${prefix}/var/macports/distfiles/${name}
checksum	Compare ${checksums} specified in a Portfile to the checksums of the fetched ${distfiles}.
extract	Unzip and untar the ${distfiles} into the path ${prefix}/var/macports/build/..../work
patch	Apply optional patch files specified in ${patchfiles} to modify a port's source code file(s).
configure	Execute the command configure in ${worksrcpath}.
build	Execute ${build.cmd} in ${worksrcpath}.
test	Execute commands to run test suites bundled with a port.
destroot	Execute the command make install DESTDIR=${destroot}in ${worksrcpath}.

Ref. http://guide.macports.org/#reference.phases -> 5.3. Port Phases

portage

name	what the function is about
pkg_setup	Use this function to perform any miscellaneous prerequisite tasks. This might include checking for an existing configuration file.
pkg_nofetch	Inform the user about required actions if for some reason (such as licensing issues) the sources may not be downloaded by Portage automatically. Use this in conjunction with RESTRICT="fetch". You only should display messages in this function, never call die.
src_unpack
src_compile	Use this function to configure and build the package. The initial working directory is S.
src_install	Use this function to install the package to an image in D. If your package uses automake, you can do this simply with emake DESTDIR="${D}" install. Make sure your package installs all its files using D as the root! The initial working directory is S.
src_test	Executed only when FEATURES="test" is set and RESTRICT="test" is unset, the default of this function executes an available testing function from any Makefiles in the ${S} directory, running either "make test" or "make check" depending on what is provided. It can be overriden to create a custom test setup.
pkg_preinst	The commands in this function are run just prior to merging a package image into the file system.
pkg_postinst	The commands in this function are run just following merging a package image into the file system.
pkg_prerm	The commands in this function are run just prior to unmerging a package image from the file system.
pkg_postrm	The commands in this function are run just following unmerging a package image from the file system.
pkg_config	You use this function to set up an initial configuration for the package after it's installed. All paths in this function should be prefixed with ROOT which points to user-specified install root which may not happen to be /. This function is only executed if and when the user runs: emerge --config =${PF}.

Ref: http://www.gentoo.org/proj/en/devrel/handbook/handbook.xml?part=2&chap=1#doc_chap2 -> Functions

pkgsrc

name	what the function is about
depends	to build and install dependencies
fetch	to fetch distribution file(s)
checksum	to fetch and check distribution file(s)
extract	to look at unmodified source
patch	to look at initial source
configure	to stop after configure stage
all or build	to stop after build stage
stage-install	to install under stage directory
test	to run package's self-tests, if any exist and supported
package	to create binary package before installing it
replace	to change (upgrade, downgrade, or just replace) installed package in-place
deinstall	to deinstall previous package
package-install	to install package and build binary package
install	to install package
bin-install	to attempt to skip building from source and use pre-built binary package
show-depends	print dependencies for building
show-options	print available options from options.mk

Ref: http://wiki.netbsd.org/pkgsrc/targets/

ports

name	what the function is about
config	Configure OPTIONS for this port using dialog(1).
fetch	Fetch all of the files needed to build this port from the sites listed in MASTER_SITES and PATCH_SITES. See FETCH_CMD, MASTER_SITE_OVERRIDE and MASTER_SITE_BACKUP.
checksum	Verify that the fetched distfile's checksum matches the one the port was tested against. Defining NO_CHECKSUM will skip this step.
depends	Install (or compile if only compilation is necessary) any dependencies of the current port. When called by the extract or fetch targets, this is run in piecemeal as fetch-depends, build-depends, etc. Defining NO_DEPENDS will skip this step.
extract	Expand the distfile into a work directory.
patch	Apply any patches that are necessary for the port.
configure	Configure the port. Some ports will ask you questions during this stage. See INTERACTIVE and BATCH.
build	Build the port. This is the same as calling the all target.
install	Install the port and register it with the package system. This is all you really need to do.

RPM spec

name	from	to	what the function is about
%prep	%_sourcedir	%_builddir	This reads the sources and patches in the source directory %_sourcedir. It unpackages the sources to a subdirectory underneath the build directory %_builddir and applies the patches.
%build	%_builddir	%_builddir	This compiles the files underneath the build directory %_builddir. This is often implemented by running some variation of "./configure && make".
%check	%_builddir	%_builddir	Check that the software works properly. This is often implemented by running some variation of "make test". Many packages don't implement this stage.
%install	%_builddir	%_buildrootdir	This reads the files underneath the build directory %_builddir and writes to a directory underneath the build root directory %_buildrootdir. The files that are written are the files that are supposed to be installed when the binary package is installed by an end-user. Beware of the weird terminology: The build root directory is not the same as the build directory. This is often implemented by running "make install".
bin	%_buildrootdir	%_rpmdir	This reads the files underneath the build root directory %_buildrootdir to create binary RPM packages underneath the RPM directory %_rpmdir. Inside the RPM directory is a directory for each architecture, and a "noarch" directory for packages that apply to any architecture. These RPM files are the packages for users to install.
src	%_sourcedir	%_srcrpmdir	This creates a source RPM package (.src.rpm) inside the source RPM directory %_srcrpmdir. These files are needed for reviewing and updating packages.

judicium

Apparently, the pkgsrc seems to be the most factorized build process. It is worthy to check though if the naming convention suits EasyBuild purposes.