imx8mp‐optima‐som - eaglelinuxplatform/meta-calixto-nxp GitHub Wiki
Yocto releases tested on Host machine versions
| Yocto | Host |
|---|---|
| Wrynose | Ubuntu 22.04 |
Please ensure you have git installed in your host machine.
sudo apt-get install git
Setting up the Repo utility
mkdir ~/bin
curl https://storage.googleapis.com/git-repo-downloads/repo > ~/bin/repo
chmod a+x ~/bin/repo
export PATH=~/bin:$PATH
Create a work directory
mkdir calixto-yocto-bsp && cd calixto-yocto-bsp
Install the BSP repo
repo init -u https://github.com/eaglelinuxplatform/calixto-manifest.git -b wrynose -m cs-imx-6.18.20-2.0.0.xml
Download the Yocto Project Layers
repo sync
Install packages required for building the images
sudo ./install_prerequisites.sh
Note
Select DISTRO and MACHINE from the table and use it in the following commands
distro |
Description |
|---|---|
fsl-imx-wayland |
Pure wayland graphics |
fsl-imx-xwayland |
wayland graphics and X11 |
machine |
Description |
|---|---|
imx8mp-calixto-optima_2gb |
i.MX8MP Processor, 2GB LPDDR4 RAM, Optima SOM Family |
imx8mp-calixto-optima_4gb |
i.MX8MP Processor, 4GB LPDDR4 RAM, Optima SOM Family |
Configure the
distroandmachine. Create a build directory
DISTRO=<distro> MACHINE=<machine> source calixto-setup-release.sh -b build_dir
Setup the environment
source setup-environment build_dir
Note
Select image from the table and use it in the following commands.
image |
Description |
|---|---|
calixto-image-minimal |
A small image that only allows a device to boot |
calixto-image-core |
An i.MX image with i.MX test applications to be used for Wayland backends |
calixto-image-multimedia |
Builds an i.MX image with a GUI without any Qt content |
calixto-image-full |
Builds an open source Qt 6 image with Machine Learning features |
Run bitbake command to start build
bitbake <image>
ls /home/${USER}/calixto-yocto-bsp/<build_dir>/tmp/deploy/images/<machine>
| Components | Images |
|---|---|
| Example of Bootloader | imx-boot-imx8mp-calixto-optima_2gb-sd.bin-flash_evk |
| Example of kernel | Image--6.18.20+git0+75ab78417e-r0-imx8mp-calixto-optima_2gb-20260916073158.bin |
| Example of dtb | imx8mp-calixto-optima.dtb |
| Example of rootfs.tar image | calixto-image-full-imx8mp-calixto-optima_2gb.rootfs-20261001045810.tar.zst |
| Example of rootfs.wic image | calixto-image-full-imx8mp-calixto-optima_2gb.rootfs-20261009070955.wic.zst |
An OS image can be flashed to an SD card using one of two primary methods: directly flashing a pre-built .wic image, or manually partitioning the SD card and writing individual components (bootloader, kernel, and rootfs).
Copy the wic.zst image in a directory. Insert the SD card into your host system and list all block devices to determine its assigned node:
lsblk
Eg: The device node assigned is /dev/sdb (a block is 1024 Bytes).
zstdcat <image_name>.wic.zst | sudo dd of=/dev/sd<partition> bs=1M conv=fsync
Note
Make sure that the device node is correct for the SD/MMC card. Otherwise, it may damage your operating system or data on your computer.
Follow steps in link to partition SD Card and flash the images
- Insert SD Card on SD card J8 connector
- Connect 12V DC power supply to J25 connector
| Root Username | root |
|---|
Go Back to HOME
Calixto Systems - 2026