Motion - dtex/johnny-five GitHub Wiki

The Motion class constructs an object that represents a single Motion Detection sensor.

Supported Motion sensors:

• Passive Infra-Red by Parallax
• Generic Passive Infra-Red, HC-SR501
• OSEPP IR Proximity Sensor
  • Note: despite its name, this is not a proximity sensor that outputs a measured distance to an obstruction.
• Sharp IR Motion Detection
  • GP2Y0D810Z0F
  • GP2Y0D815Z0F

• pin A Number pin address for Motion sensor.

• options An object of property parameters.

  Property	Type	Value/Description	Default	Required
  pin	Number, String	Analog or Digital Pin. Use for non-I2C sensors		Yes (non-I2C)
  controller	String	PIR, HCSR501, GP2Y0D805Z0F, GP2Y0D810Z0F, GP2Y0D815Z0F. See aliases	PIR	No

  Controller Alias Table

  Controller	Alias
  HC-SR501	PIR
  HCSR501	PIR
  GP2Y0D805Z0F	0D805
  GP2Y0D805Z0F	805
  GP2Y0D810Z0F	0D810
  GP2Y0D810Z0F	810
  GP2Y0D815Z0F	0D815
  GP2Y0D815Z0F	815

This is the default controller.

// Pin only
new five.Motion(7);

// Options object with pin property
var motion = new five.Motion({
  pin: 7
});

var motion = new five.Motion({
  controller: "GP2Y0D805Z0F"
});

var motion = new five.Motion({
  controller: "GP2Y0D810Z0F", 
  pin: "A0"
});

var motion = new five.Motion({
  controller: "GP2Y0D815Z0F", 
  pin: "A0"
});

var five = require("johnny-five");
var board = new five.Board();

board.on("ready", function() {

  // Create a new `motion` hardware instance.
  var motion = new five.Motion(7);

  // "calibrated" occurs once, at the beginning of a session,
  motion.on("calibrated", function() {
    console.log("calibrated");
  });

  // "motionstart" events are fired when the "calibrated"
  // proximal area is disrupted, generally by some form of movement
  motion.on("motionstart", function() {
    console.log("motionstart");
  });

  // "motionend" events are fired following a "motionstart" event
  // when no movement has occurred in X ms
  motion.on("motionend", function() {
    console.log("motionend");
  });
});

• data The "data" event is fired as frequently as the user defined freq will allow in milliseconds. ("data" replaced the "read" event)

• change The "change" event is fired whenever a change within the motion detection field is observed.

• motionstart The "motionstart" event is fired when motion occurs within the observable range of the PIR/Motion/IR.Proximity sensor

• motionend The "motionend" event is fired when motion has ceased within the observable range of the PIR/Motion/IR.Proximity sensor.

• calibrated The "calibrated" event is fired when PIR/Motion sensor is ready to detect movement/motion in observable range. (PIR/Motion ONLY)