Tuya/Jinvoo/Heiman curtain switch (SM-SW101-ZC)

[Pedder007]

Device

• Product name: SM-SW101-ZC
• Manufacturer: Tuya/Jinvoo (Heiman, read from the node list as vendor)
• Model identifier: TS0302
• Device type:
  • Light
  • Lock
  • Remote
  • Sensor
  • Siren
  • Thermostat
  • Other: Smart Wall Switch / Curtain Switch

Screenshots

[Pedder007]

Update Basic Cluster Info (did reading again)

Having now the manufacturer name in the field: _TYZB01_dazsid15
I searched an found this: Koenkk/zigbee-herdsman-converters#621

I Also tested to steer the device direct from the deConz Hui and it worked:

So it seems already to work with the ConBee II stick and deConz, but not in Pimatic, which might have to be solved there then

[SwoopX]

Closing this as device is now supported with .79 beta.

[Pedder007]

Hey @SwoopX, thanks for your effort 👍
... but I‘m a bit confused 😊What does ‚supported with .79 beta‘ mean?
Can I use the device now by Pimatic?

[SwoopX]

When you have subscribed to the apt beta channel and updated to the current version, then yes. Also marthoc should have updated the container already.

[Pedder007]

Not quiet sure what you mean, but I will spend some research and convinced that I will find the answer 😉
Thanks again!

[Pedder007]

Hi again @SwoopX, I'm sorry but I couldn't find anything which seems to fit to your hint. I still have no clue at all what I have to update from where. I'm running Pimatic with the raspbee 0.1.5 plugin on a Raspi4 with a ConBee II and deConz in headless mode.
Phoscon Vers. is 2.05.75 and stick firmware is 264A0700.
Could you support with a link? That would be really great :-)

[SwoopX]

@Pedder007 I'm afraid I dont know Pimatic so I probably cannot help you there. How have you installed deconz anyway. You are already 4 versions behind 😉

If it is a package pimatics folks provide, they maybe should update.

[Pedder007]

Ok, I understand this an searched a bit more. I think I now also got your point. You updated/enhanced the latest deconz version 2.05.79... to use the curtain switch, right?
I was a bit lost as you only wrote .79 :-)
If this is the case, then it‘s definitely a question of integration in the respective Pimatic plugin.
As written somewhere, via the Deconz-gui I have already been able to steer the device, also with .75.
Thanks for now then 👍

[rkupfer2020]

Hi,
I use the same Heimann / _TYZB01_dazsid15 curtain switch with Conbee and Deconz. I already upated the Docker Container to 2.05.79. But I am still not able to use the Deconz GUI to open/close the curtains. Only with VNC they respond to the commands.
Under Home Assistant I can open and stop the curtains, but not close them. Anybody has an idea how to solve the issue?
Best regards
Roger

[SwoopX]

But I am still not able to use the Deconz GUI to open/close the curtains.

I assume you mean Phoscon in your case. This is kind of normal as devices have to be added seperately. I'd recommend to raise a corresponding request at the Phoscon repository.

Only with VNC they respond to the commands.

This is actually the deconz GUI. If all works well there, then the device doesn't have any issue.

Under Home Assistant I can open and stop the curtains, but not close them.

Probably the wrong API commands are used in this case. See #3063

[cobirnm]

Device

• Product name: SM-SW101-ZC

• Manufacturer: Tuya/Jinvoo (Heiman, read from the node list as vendor)

• Model identifier: TS0302

• Device type:

  • Light
  • Lock
  • Remote
  • Sensor
  • Siren
  • Thermostat
  • Other: Smart Wall Switch / Curtain Switch

Screenshots

Have you been able to Calibrate the Switch?

[djfanatix]

Did you try to modify 0x0017 or 0x007 to 0x002 (calibration mode)? Does this work?

[Pedder007]

Hi, sorry didn't find the time to continue here earlier.
I now just tested again (after first updating the PhosconApp and ConBee II firmware to newest releases).
The PhosconApp now shows the device, but as a 'light'!? This happened three times now, allthough I used the discovering mode for switches.
Via the deconz-gui I was able to switch up/down/close, so for me nothing seems having changed to the status above.
I fear as long as the device is only discovered as a light I will also not get it integrated in my HO Pimatic.