New Device Request for Hive Motion Sensor

[eddiehowrya]

This request is for the Hive motion sensors which are part of the British Gas family of smart devices.
https://www.hivehome.com/products/hive-motion-sensor?cid=ppc.goo.bran....&icid=mname%3Amega-menu.iname%3Ahive-motion-sensor

Node Info

Occupancy Cluster

Power Config Cluster

Temperature Cluster

Basic Cluster

Illuminance Cluster

[SwoopX]

I'll put it on my list.

[Mimiix]

It seems this issue is resolved or otherwise inactive. If it is not, please re-open!

[eddiehowrya]

Sensors are working well with the new version, thank you.

[lwsrbrts]

Sensors are working well with the new version, thank you.

@eddiehowrya - apologies for responding on a closed issue. I wondered if you had done anything specific with your Hive sensors after pairing them? I have a sensor that seems to be self-activating - I only have the one Hive motion sensor so don't know if this affects others.

It detects motion for one minute which then clears for 4 minutes and then it detects motion again for a minute...so on and so forth.

Screenshot from Home Assistant of it activating itself overnight.

[hencoappel]

Sensors are working well with the new version, thank you.

@eddiehowrya - apologies for responding on a closed issue. I wondered if you had done anything specific with your Hive sensors after pairing them? I have a sensor that seems to be self-activating - I only have the one Hive motion sensor so don't know if this affects others.

It detects motion for one minute which then clears for 4 minutes and then it detects motion again for a minute...so on and so forth.

Screenshot from Home Assistant of it activating itself overnight.

I have the exact same issue, did you ever find a fix?

[lwsrbrts]

Unfortunately not. I even tried just a few days ago with the latest version of deCONZ and the latest firmware on the ConBee II but had the same results. I also tried changing the detection thresholds and similar settings within deCONZ for the device alas, same results.