Overview:

First steps:

• First startup What happens if you start a newly flashed board: autoconfiguration
• WiFi configuration Connect your rdzTTGOsonde to a WiFi network

Detailed configuration:

Coonnect to the web interface of your rdzTTGOsonde (http://192.168.4.1 in access point mode, dynamic IP address as shown on display in WiFi client mode, or http://rdzsonde.local if your browser supports mDNS). In the Config tab, you can configure the following items:

• General configuration
• Display configuration
• Spectrum configuration
• Receiver configuration How to calibrate and optimize receiver configuration
• Data feed configuration _How to configure sending received data to external devices (aprsmap, APRSdroid)
• MQTT configuration
• SondeHub settings
• SondeHub import
• Hardware configuration How to adjust configuration to specifics of your hardware